WAGO Connector for Use with PROFIBUS
- N° de stock RS:
- 508-4003
- Référence fabricant:
- 750970
- Fabricant:
- WAGO
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau en stock, il n'est plus vendu par le fabricant.
- N° de stock RS:
- 508-4003
- Référence fabricant:
- 750970
- Fabricant:
- WAGO
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | WAGO | |
| Accessory Type | Connector | |
| Product Type | Connector | |
| For Use With | PROFIBUS | |
| IP Rating | IP20 | |
| Hazardous Area Certification | EAC | |
| Standards/Approvals | UL | |
| Communication Protocol | I/O | |
| Sélectionner tout | ||
|---|---|---|
Marque WAGO | ||
Accessory Type Connector | ||
Product Type Connector | ||
For Use With PROFIBUS | ||
IP Rating IP20 | ||
Hazardous Area Certification EAC | ||
Standards/Approvals UL | ||
Communication Protocol I/O | ||
Non conforme
- Pays d'origine :
- DE
WAGO Fieldbus Connector
The WAGO Fieldbus connector is an innovation that links a PROFIBUS device to a PROFIBUS line. It has Stecker 9-Pin D-sub male and female connector.
BUS connectors
:
Rewireable bus interface connectors are suitable for Bitbus, CAN-Bus, Interbus-S (Fieldbus) and Profibus systems. Compact and high quality, the 9-pole sub-D housings are available in bus node or bus termination versions and are colour-coded for easy identification. Service nodes are also available for CAN-Bus and Profibus systems, allowing online programming and repair. Each interface comes with detailed assembly instructions and mounting accessories.
Available in versions with horizontal or vertical cable outlets
Fast and reliable connection via screw terminals on the PCB
Bus terminations include SMT termination resistors
Colour-coded bodies aid installation and repair
Safe ESD protection thanks to fully insulated housings
Supplied with reliable crimp strain relief
Features and Benefits
Two horizontal cable entries: one input and one output
Fast and maintenance‐free cage clamp connection can be held in the open position with the help of an actuation slide mechanism
Externally operable switch to activate and/or deactivate the network terminating resistor
PG interface
Enables the quick, easy connection of incoming and outgoing bus lines
Baud rate: up to 12Mbps
Supply voltage: 4.75VDC to 5.25V DC
Operating temperature ranges between 0°C and 60°C
Certifications
IP20 rated
UL 508 approved
Liens connexes
- WAGO Connector for Use with PROFIBUS
- WAGO 750 Series Connector for Use with PROFIBUS
- WAGO 750 Series Connector for Use with PROFIBUS Device to a PROFIBUS Line
- Siemens Bus Connector for Use with PROFIBUS
- Siemens PROFIBUS Series Communication Module for Use with PROFIBUS
- Siemens Data Acquisition Connector for Use with Connecting PROFIBUS Nodes to the PROFIBUS Bus Cable
- Siemens SIMATIC Series Connector for Use with SIMATIC DP PROFIBUS
- Siemens PLC Cable for Use with PROFIBUS