Mitsubishi Electric PLC I/O Module Analogue Transistor for use with FX2N Series
- N° de stock RS:
- 320-9115
- Référence fabricant:
- FX2N-16EYT-ESS/UL
- Fabricant:
- Mitsubishi Electric
Sous-total (1 unité)*
241,39 €
(TVA exclue)
292,08 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 2 unité(s) prête(s) à être expédiée(s)
- Plus 3 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 241,39 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 320-9115
- Référence fabricant:
- FX2N-16EYT-ESS/UL
- Fabricant:
- Mitsubishi Electric
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Mitsubishi Electric | |
| Product Type | PLC I/O Module | |
| Input Type | Analogue | |
| Number of Inputs | 16 | |
| Output Type | Transistor | |
| Number of Outputs | 16 | |
| For Use With | FX2N Series | |
| Standards/Approvals | cUL, CE, UL | |
| Width | 40mm | |
| Depth | 87mm | |
| Sélectionner tout | ||
|---|---|---|
Marque Mitsubishi Electric | ||
Product Type PLC I/O Module | ||
Input Type Analogue | ||
Number of Inputs 16 | ||
Output Type Transistor | ||
Number of Outputs 16 | ||
For Use With FX2N Series | ||
Standards/Approvals cUL, CE, UL | ||
Width 40mm | ||
Depth 87mm | ||
Statut RoHS : Exempté
- Pays d'origine :
- JP
Digital Expansion Blocks
These are available in 8 or 16 input or output point sizes. They attach directly to the right hand end of the Base Unit or Expansion Unit (see Digital Expansion Units below) which also provides them with power. Input blocks are opto-isolated, 24Vdc sink or source selectable to suit NPN or PNP sensors, and output blocks are available with relay or transistor outputs. The number of blocks that may be added depends on a number of factors. However, as a guide, with the FX1N, blocks up to 32 I/O can be added. Further expansion (of FX1N and FX2N) is achieved by adding an Expansion Unit (see 2 below), which in turn can be further expanded by adding more Expansion Blocks. With the FX2N, the number of I/O that can be added depends on the size of the Base Unit. For 16 and 32 I/O FX2N base units and 32 I/O Expansion units, up to 32 inputs, or 24 outputs, or (for example) 24 inputs and 8 outputs can be added. For larger Base and Expansion Units, up to 64 inputs, or 48 outputs, or (for example) 32 inputs and 24 outputs can be added. For full configuration details and limitations, please refer to the FX1N and FX2N Hardware Manuals.
Additional Modules for Mitsubishi FX1S, FX1N & FX2N PLC's
Products in this range are for use with FX1S, FX1N and FX2N PLC, unless specified otherwise. All are DIN rail mount and are 90mm high and 87mm deep. The width varies and is tabled below.
All of the following products, except the Extension Cable, attach directly to the right hand end of the previous unit, block or module using the short integral lead.