Siemens SIMATIC Series Coupler for Use with Max.4 PN-Controller
- N° de stock RS:
- 203-4196
- Numéro d'article Distrelec:
- 302-64-185
- Référence fabricant:
- 6ES7158-3AD10-0XA0
- Fabricant:
- Siemens
Sous-total (1 unité)*
626,76 €
(TVA exclue)
758,38 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 18 unité(s) prête(s) à être expédiée(s)
- Plus 7 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
- Plus 15 unité(s) expédiée(s) à partir du 17 juin 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 626,76 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 203-4196
- Numéro d'article Distrelec:
- 302-64-185
- Référence fabricant:
- 6ES7158-3AD10-0XA0
- Fabricant:
- Siemens
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Siemens | |
| Accessory Type | PN/PN Coupler | |
| Product Type | Coupler | |
| Series | SIMATIC | |
| For Use With | Max.4 PN-Controller | |
| Standards/Approvals | No | |
| Hazardous Area Certification | No | |
| Communication Protocol | I/O | |
| Sélectionner tout | ||
|---|---|---|
Marque Siemens | ||
Accessory Type PN/PN Coupler | ||
Product Type Coupler | ||
Series SIMATIC | ||
For Use With Max.4 PN-Controller | ||
Standards/Approvals No | ||
Hazardous Area Certification No | ||
Communication Protocol I/O | ||
- Pays d'origine :
- DE
Siemens Coupler For Use With Max.4 PN-Controller, Max 24V DC Voltage Rating, 16 Coupling Modules - SIMATIC Series - 6ES7158-3AD10-0XA0
Use this PN/PN coupler from Siemens to enable safe and efficient data transfer between two PROFINET (PN) controllers. You can use it to connect one Ethernet subnet to another to transmit a high volume of data. It can also exchange data between a maximum of one 4-PN controller per subnet. This device has two BusAdapter connector ports, one designed to receive data and the other designed to transmit it, for the automated control of your system. This coupler is ideal for use in data centres or computer programming environments.
• Compact dimensions of 100 (W) x 117 (H) x 74mm (D) for mounting in tight spaces
• Easy installation via an integrated mounting rail
• Wide operating temperature range between -30°C and +60°C for use in harsh environments
• Multi-coloured LED light indicates system status at all times for easy monitoring
• Stored energy of 10ms (metres per second) for backup in the event of a mains power failure
What’s a control coupler?
A control coupler is used to connect two devices in an electrical circuit or system. This coupler is a PN/PN coupler, meaning it has two PROFINET interfaces, each connected to a subnet. It's used for exchanging data across your system.
Liens connexes
- Siemens SIMATIC Series Coupler for Use with Connecting Two PROFIBUS DP Networks
- Siemens SIMATIC S7 Series Coupler for Use with Redundant Controllers
- Siemens SIMATIC S7 Series Module for Use with Y-Coupler
- Siemens SIMATIC Series Coupler for Use with SIMATIC
- Siemens SIMATIC Series Connector for Use with ET 200
- Helmholz GmbH & Co. KG 158-3PN Series 4 Port RJ45 PN/PN Coupler
- Siemens SIMATIC S7-200 Series PLC Cable for Use with 6ES Series
- Siemens SIMATIC DP Series Bus Connector for Use with PROFIBUS Bus Cable