Siemens SIMATIC Series Coupler for Use with Connecting Two PROFIBUS DP Networks
- N° de stock RS:
- 203-4048
- Numéro d'article Distrelec:
- 302-64-184
- Référence fabricant:
- 6ES7158-0AD01-0XA0
- Fabricant:
- Siemens
Sous-total (1 unité)*
682,03 €
(TVA exclue)
825,26 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 34 unité(s) prête(s) à être expédiée(s)
- Plus 8 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 682,03 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 203-4048
- Numéro d'article Distrelec:
- 302-64-184
- Référence fabricant:
- 6ES7158-0AD01-0XA0
- Fabricant:
- Siemens
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Siemens | |
| Accessory Type | DP/DP Coupler | |
| Product Type | Coupler | |
| Series | SIMATIC | |
| For Use With | Connecting Two PROFIBUS DP Networks | |
| IP Rating | IP20 | |
| Hazardous Area Certification | No | |
| Standards/Approvals | No | |
| Communication Protocol | I/O | |
| Supply Voltage | 24V | |
| Sélectionner tout | ||
|---|---|---|
Marque Siemens | ||
Accessory Type DP/DP Coupler | ||
Product Type Coupler | ||
Series SIMATIC | ||
For Use With Connecting Two PROFIBUS DP Networks | ||
IP Rating IP20 | ||
Hazardous Area Certification No | ||
Standards/Approvals No | ||
Communication Protocol I/O | ||
Supply Voltage 24V | ||
- Pays d'origine :
- DE
Siemens Coupler For Use With PROFIBUS DP Networks, 24V DC Supply Voltage - SIMATIC Series - 6ES7158-0AD01-0XA0
Expand your PROFIBUS DP system using this coupler from Siemens. It features two independent interfaces so you can plug in up to two modules for smooth data transfer in your PLC setup. The unit has a wide data-exchange rate between 0 and 244 bytes for use in demanding applications. The DIP switches at the top allow you to easily set the PROFIBUS address of the modules for convenience. An operating temperature range between 0°C and +60°C means this component can withstand harsh environments.
• LED indicators for quick and easy status monitoring
• Integrated diagnostics functions enable test running to quickly detect any errors
• Electrical isolation between the DP networks helps prevent system downtime
How does the PROFIBUS DP network work?
The PROFIBUS DP network lets you connect a remote I/O module assembly directly to a PLC, eliminating the need to run separate wires from the field devices to the PLC.
How do I mount this coupler?
You can mount this device by simply clipping it onto a standard DIN rail, which cuts out the need for complex tools. It's advisable to install it in an upright position so you can easily access the DIP switches at the top.
Liens connexes
- Siemens SIMATIC DP Series Bus Connector for Use with PROFIBUS Bus Cable
- Siemens SIMATIC DP Series Plug for Use with PROFIBUS Bus Cable
- Siemens SIMATIC Series Coupler for Use with Max.4 PN-Controller
- Siemens 6ES7972 Series Repeater for Use with PROFIBUS DP
- Siemens SIMATIC Series Connector for Use with SIMATIC DP PROFIBUS
- Siemens SIMATIC Series Plug for Use with SIMATIC DP PROFIBUS
- Siemens SIMATIC Series Bus Connector for Use with SIMATIC DP PROFIBUS
- B&R X67 Series for Use with PROFIBUS DP Networks