Offre groupée disponible
Sous-total (1 sachet de 5 unités)*
12,14 €
(TVA exclue)
14,69 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 55 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Sachet(s) | Le Sachet | Prix par unité* |
|---|---|---|
| 1 - 4 | 12,14 € | 2,428 € |
| 5 - 9 | 11,91 € | 2,382 € |
| 10 + | 11,67 € | 2,334 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 521-7720
- Fabricant:
- RS PRO
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | RS PRO | |
| Shaft Diameter | 3mm | |
| Outside Diameter | 6mm | |
| Material | Bronze | |
| Length | 8mm | |
| Sélectionner tout | ||
|---|---|---|
Marque RS PRO | ||
Shaft Diameter 3mm | ||
Outside Diameter 6mm | ||
Material Bronze | ||
Length 8mm | ||
Statut RoHS : Exempté
- Pays d'origine :
- GB
RS PRO Bronze Plain Bushes
RS PROs plain bushes are cylindrical components made from bronze used to support and guide spur gears. Spur gears are a type of cylindrical gear that have straight teeth that run parallel to the axis of rotation and are used to transmit power between two parallel shafts. The primary purpose of a bush is to help the gears rotate smoothly and without excessive friction, while also reducing wear and tear on the gears themselves.
Features and Benefits
- Sintered bronze bush
- Oil-less
- Suitable for use with Delrin gears
Specifications
- Bore tolerance: G7
- OD tolerance: s7
- Length tolerance: js13
RS PRO Bronze Plain Bush Variant – Available Separately
- Length: 7 mm, Shaft dia. 3mm, RS stock no: 521-7708
- Length: 8 mm, Shaft dia. 3mm, RS stock no: 521-7720
- Length: 9 mm, Shaft dia. 4mm, RS stock no: 521-7736
- Length: 12 mm, Shaft dia. 4mm, RS stock no: 521-7742
- Length: 12 mm, Shaft dia. 5mm, RS stock no: 521-7758
- Length: 14 mm, Shaft dia. 5mm, RS stock no: 521-7764
Applications
The bushes are typically installed in the gear housing or gearbox and serve as a bearing surface for the gear teeth, allowing them to rotate without coming into direct contact with the housing.
Liens connexes
- RS PRO Plain Bush 5mm Outside Diameter
- RS PRO Plain Bush 6mm Outside Diameter
- RS PRO Plain Bush 8mm Outside Diameter
- FIBET Plain Bush 25mm Outside Diameter
- Huco Reducing Bush 253.14 6.35mm Outside Diameter
- Huco Reducing Bush 251.14 5mm Outside Diameter
- Huco Reducing Bush 253.15 6.35mm Outside Diameter
- Paulstra Hutchinson Plain Bush 22mm Outside Diameter
