Références fabricant

Fluke 9040 Phase Rotation Tester 15 Hz, 400 Hz Max, 700V Max

N° de stock RS:: 517-4651
Numéro d'article Distrelec:: 176-64-998
Référence fabricant:: Fluke-9040EUR
Fabricant:: Fluke

Fluke 9040 Phase Rotation Tester 15 Hz, 400 Hz Max, 700V Max

Sous-total (1 unité)*

330,00 €

(TVA exclue)

399,30 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

En stock

10 unité(s) prête(s) à être expédiée(s)
Plus 21 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité
1 +	330,00 €

*Prix donné à titre indicatif

N° de stock RS:: 517-4651
Numéro d'article Distrelec:: 176-64-998
Référence fabricant:: Fluke-9040EUR
Fabricant:: Fluke

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Fluke
	Connection Type	Test Probe
	Product Type	Phase Rotation Tester
	Display Type	LCD
	Current Consumption	1mA
	Minimum Operating Temperature	0°C
	Weight	200g
	Height	124mm
	Maximum Operating Temperature	40°C
	Length	61mm
	Standards/Approvals	No
	Maximum Frequency	400Hz
	Minimum Voltage	40V
	Model Number	9040
	Width	27mm
	Maximum Voltage	700V
	Minimum Frequency	15Hz

	Sélectionner tout
	Marque Fluke
	Connection Type Test Probe
	Product Type Phase Rotation Tester
	Display Type LCD
	Current Consumption 1mA
	Minimum Operating Temperature 0°C
	Weight 200g
	Height 124mm
	Maximum Operating Temperature 40°C
	Length 61mm
	Standards/Approvals No
	Maximum Frequency 400Hz
	Minimum Voltage 40V
	Model Number 9040
	Width 27mm
	Maximum Voltage 700V
	Minimum Frequency 15Hz

Statut RoHS : Exempté

Pays d'origine :: CN

Fluke Phase Rotation Tester, 700V Maximum Voltage, 15Hz Minimum Frequency - Fluke-9040EUR

This phase rotation tester is a Compact instrument for determining phase sequence and three-phase presence in industrial and commercial electrical systems. It detects the direction of rotation and displays phase indication on an LCD while deriving supply power from the circuit under test, making it suitable for checking motor and drive connections and verifying correct wiring before commissioning.

Features & Benefits

• Voltage range 40–700V enables testing of medium-voltage supplies
• Frequency coverage 15–400 Hz supports varied industrial drives
• Draws 1 mA from the circuit for non-intrusive measurement
• Clear LCD display provides unambiguous three-phase readout
• Self-powered operation removes the need for separate batteries
• IP40 rating and continuous operating timer allow sustained use

Applications

• Suitable for verifying motor Terminal wiring on installation sites
• Ideal for confirming rotation direction on three-phase drives
• Used for fault-finding in automation and control panels
• Can be used for commissioning of industrial distribution systems
• Used with portable test rigs for site acceptance testing

How is the instrument connected to live conductors safely?

It uses three self-retaining test probes with a variable clamp range to maintain secure contact in industrial sockets and around conductors.

What environmental limits should be observed during use?

Operate the unit between 0°C and 40°C and avoid exposure to conditions exceeding its IP40 protection to prevent ingress-related faults.

What electrical categories define safe use on different installations?

The tester meets overvoltage category ratings suitable for distribution environments up to CAT III 600V and CAT IV 300 V, guiding appropriate site application.

What is supplied to perform typical site tests?

The package includes three test probes, an alligator clip and a user manual to support standard phase-sequence checks.

How portable is the device for field technicians?

With a Compact form factor and a weight of 200 g it is intended for handheld use and easy transport between job sites.