Martindale EPAT1600 PAT Tester, Class I, Class II, Class IT Test Type
- N° de stock RS:
- 712-5440
- Référence fabricant:
- EPAT1600
- Fabricant:
- Martindale
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
- N° de stock RS:
- 712-5440
- Référence fabricant:
- EPAT1600
- Fabricant:
- Martindale
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Martindale | |
| Tester Type | Dual Voltage PAT | |
| Test Type | Class I, Class II, Class IT | |
| Testing Method | Manual | |
| Download | No | |
| Model Number p | EPAT1600 | |
| Plug Type | Type G - British 3-pin | |
| Power Source | Mains | |
| Weight | 4kg | |
| Height | 144mm | |
| Length | 330mm | |
| Maximum Operating Temperature | +35°C | |
| Maximum Supply Voltage | 240V | |
| Minimum Supply Voltage | 110V | |
| Minimum Operating Temperature | 0°C | |
| Width | 263mm | |
| Sélectionner tout | ||
|---|---|---|
Marque Martindale | ||
Tester Type Dual Voltage PAT | ||
Test Type Class I, Class II, Class IT | ||
Testing Method Manual | ||
Download No | ||
Model Number p EPAT1600 | ||
Plug Type Type G - British 3-pin | ||
Power Source Mains | ||
Weight 4kg | ||
Height 144mm | ||
Length 330mm | ||
Maximum Operating Temperature +35°C | ||
Maximum Supply Voltage 240V | ||
Minimum Supply Voltage 110V | ||
Minimum Operating Temperature 0°C | ||
Width 263mm | ||
Statut RoHS : Exempté
Legal Minimum Dual Voltage Manual PAT Tester Martindale EPAT1600
The EasyPAT 1600 is a legal minimum tester suitable for high speed, low-cost testing on all tools, appliances, and IT equipment in accordance with industry standards. This PAT tester can test all 110V and 230V portable appliances and is ideal for when testing is needed quickly.
Fast and easy to use, the 3 main tests, earth continuity, insulation, and fuse, are selected by one of 3 push-button switches on the front panel. A three-position rocker switch selects an earth continuity test current of 100mA DC, 8A AC or 25A AC. This one button, one test approach gives very fast and simple testing.
Fast and easy to use, the 3 main tests, earth continuity, insulation, and fuse, are selected by one of 3 push-button switches on the front panel. A three-position rocker switch selects an earth continuity test current of 100mA DC, 8A AC or 25A AC. This one button, one test approach gives very fast and simple testing.
Features and Benefits:
- Fast and easy to operate
- Class I and Class II PAT testing
- Tests 110 V and 230 V equipment
- Selectable 100mA_DC, 8A AC or 25A AC earth continuity test suitable for all tools, appliances and IT equipment testing
- Built in lead tester for IEC power leads
- Hard case with storage room for accessories
- Manual tests by simple push button operation
- 500V insulation test
- Fuse test verifies that fuse (if fitted) is intact, and the appliance was correctly switched on during the earth & insulation tests
- IEC / extension lead test facility
- Measurement display on the large LCD Display
- 1.7M fixed lead, with a 13A moulded plug
- 3m long, detachable lead, heavy duty crocodile/alligator clip
- Dimensions: 330 x 263 x 144mm
- ABS/polycarbonate material
- Weight 4kg
Supplied with
Earth continuity lead, 13A mains plug to IEC320 connector adaptor, instruction manual.
Liens connexes
- Martindale EPAT1600 PAT Tester Class II, Class IT Test Type With RS Calibration
- Martindale EPAT1600 PAT Tester Class II, Class IT Test Type With UKAS Calibration
- Martindale MPATPLUS PAT Tester Class I Test Type
- Martindale EPAT2100 PAT Tester Class II Test Type
- Martindale HPAT400/2 PAT Tester Class II Test Type
- Martindale HPAT600/2 PAT Tester Class II Test Type
- Martindale HPAT500/2 PAT Tester Class II Test Type
- Martindale HPAT PAT Testing Kit Class II Test Type