Fluke 120B Series, 40 MHz Handheld Oscilloscope, 2 Channels
- N° de stock RS:
- 122-8937
- Numéro d'article Distrelec:
- 300-47-583
- Référence fabricant:
- FLUKE-124B/EU/S
- Fabricant:
- Fluke
Sous-total (1 unité)*
3 564,00 €
(TVA exclue)
4 312,44 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 2 unité(s) prête(s) à être expédiée(s)
- Plus 1 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 3 564,00 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 122-8937
- Numéro d'article Distrelec:
- 300-47-583
- Référence fabricant:
- FLUKE-124B/EU/S
- Fabricant:
- Fluke
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Fluke | |
| Product Type | Oscilloscope | |
| Bandwidth | 40MHz | |
| Number of Channels | 2 | |
| Oscilloscope Type | Handheld | |
| Oscilloscope Form | Digital | |
| Interface Type | USB | |
| Screen Size | 5.7 in | |
| Series | 120B | |
| Standards/Approvals | IEC 61010-2-033, IEC 61010-4 | |
| Width | 55mm | |
| Depth | 132mm | |
| Height | 259mm | |
| Minimum Time Base | 10ns/div | |
| Maximum Time Base | 500ns/div | |
| Battery Type | Lithium-ion | |
| Plug Type | EU | |
| Display Type | TFT Colour | |
| Battery Life | 7h | |
| Safety Category Level | CAT III, CAT IV | |
| Safety Category Voltage | 600V | |
| Power Source | Battery, Mains | |
| Minimum Vertical Sensitivity | 5mV/div | |
| Maximum Vertical Sensitivity | 200V/div | |
| Rise Time | 8.75ns | |
| Sélectionner tout | ||
|---|---|---|
Marque Fluke | ||
Product Type Oscilloscope | ||
Bandwidth 40MHz | ||
Number of Channels 2 | ||
Oscilloscope Type Handheld | ||
Oscilloscope Form Digital | ||
Interface Type USB | ||
Screen Size 5.7 in | ||
Series 120B | ||
Standards/Approvals IEC 61010-2-033, IEC 61010-4 | ||
Width 55mm | ||
Depth 132mm | ||
Height 259mm | ||
Minimum Time Base 10ns/div | ||
Maximum Time Base 500ns/div | ||
Battery Type Lithium-ion | ||
Plug Type EU | ||
Display Type TFT Colour | ||
Battery Life 7h | ||
Safety Category Level CAT III, CAT IV | ||
Safety Category Voltage 600V | ||
Power Source Battery, Mains | ||
Minimum Vertical Sensitivity 5mV/div | ||
Maximum Vertical Sensitivity 200V/div | ||
Rise Time 8.75ns | ||
Statut RoHS non applicable
- Pays d'origine :
- RO
Fluke 120B Series Oscilloscope, 40MHz Bandwidth, 2 Channels - FLUKE-124B/EU/S
This oscilloscope is a portable handheld instrument designed for field and workshop waveform analysis in automation, electronics, electrical and mechanical environments. It combines battery and mains power options with a USB Interface for data transfer, enabling on-site measurements and straightforward connectivity for further analysis.
Features & Benefits
• 40MHz bandwidth supports common signal frequency diagnostics
• 2-channel input allows simultaneous comparison of two signals
• 8.75ns rise time captures fast transient edges
• 5mV/div sensitivity detects low-amplitude signals
• 200V/div maximum vertical range measures high-voltage circuits
• 500ns/div maximum time base resolves Rapid timing events
• 2-channel input allows simultaneous comparison of two signals
• 8.75ns rise time captures fast transient edges
• 5mV/div sensitivity detects low-amplitude signals
• 200V/div maximum vertical range measures high-voltage circuits
• 500ns/div maximum time base resolves Rapid timing events
**Applications**
• Suitable for troubleshooting control system signal integrity
• Ideal for verifying sensor outputs in automation equipment
• Used for inspecting power-electronics switching waveforms
• Can be used for maintenance checks on electrical distribution components
• Used with portable test rigs for mechanical vibration transducer diagnostics
• Ideal for verifying sensor outputs in automation equipment
• Used for inspecting power-electronics switching waveforms
• Can be used for maintenance checks on electrical distribution components
• Used with portable test rigs for mechanical vibration transducer diagnostics
How does the instrument handle measurement portability on site?
It operates from internal battery power or mains supply and has a Compact handheld form for easy transport between locations.
What connection options are available for exporting captured waveforms?
A USB Interface is provided to transfer data to a PC or compatible storage device for further analysis and reporting.
How fine is the instrument’s horizontal time resolution for timing measurements?
The minimum time base setting is 10ns/div which enables fine temporal resolution for detailed timing and transient studies.
Which safety or regulatory designations are present for use in industrial settings?
It is designed to meet IEC 61010‑1 and IEC 61010‑2‑033 standards relevant to measurement equipment safety and performance.
What physical handling characteristics affect in-field use?
The handheld form factor and narrow width facilitate one-handed operation and access in confined spaces.