RS PRO IDM103N Handheld Digital Multimeter, 10A ac Max, 10A dc Max, 1000V ac Max

Voir l’ensemble des Multimeters

Sous-total (1 unité)*

196,47 €

(TVA exclue)

237,73 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
En stock
  • 2 unité(s) prête(s) à être expédiée(s)
  • Plus 28 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
  • Plus 100 unité(s) expédiée(s) à partir du 16 juin 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité
Prix par unité
1 +196,47 €

*Prix donné à titre indicatif

N° de stock RS:
123-3235
Numéro d'article Distrelec:
304-05-201
Fabricant:
RS PRO
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

RS PRO

Multimeter Type

Handheld

Display Type

Digital

Model Number p

IDM103N

Functions Measured

AC Current, AC Voltage, DC Current, DC Voltage, Frequency, Resistance

Absolute Maximum AC Voltage Measurement

1000V ac

Absolute Maximum DC Current Measurement

10A dc

Absolute Maximum DC Voltage Measurement

1000V dc

Absolute Maximum Resistance Measurement

40MΩ

Absolute Maximum AC Current Measurement

10A ac

True RMS

No

Absolute Maximum Capacitance Measurement

40mF

Maximum Frequency

40MHz

DC Current Measurement Resolution

10µA dc

AC Current Measurement Resolution

10µA ac

DC Voltage Measurement Resolution

100µV dc

Resistance Measurement Resolution

100mΩ

AC Voltage Measurement Resolution

0.1mV ac

Capacitance Measurement Resolution

1pF

Safety Category Level

CAT II, CAT III

Height

212mm

Minimum Operating Temperature

0°C

Best Resistance Measurement Accuracy

±0.6% + 3 Digits

Maximum Operating Temperature

+50°C

Battery Type

AAA 1.5 V, AM4, IEC LR03

Safety Category Voltage

600 V, 1000V

Best DC Current Accuracy

±0.6% + 2 Digits

Weight

620g

Width

55mm

Best AC Current Accuracy

±1.5% + 5 Digits

Length

100mm

Best DC Voltage Accuracy

±0.25% + 2 Digits

Best AC Voltage Accuracy

±1.3% + 5 Digits

Best Capacitance Measurement Accuracy

±2% + 8 Digits

Dimensions

100 x 55 x 212 (with Holster)mm

Pays d'origine :
TW

RS PRO IDM103N Digital Multimeter


RS PRO IDM103N digital multimeters are handheld devices which can measure capacitance, voltage, electrical current and resistance with diode and continuity check. This meter has an LCD display where the measurement readouts can be viewed.

This digital multimeter offers high specification performance with 4000 Count display and 42 segment bar graph.

RS PRO range of handheld and bench digital multimeters are RS approved meaning that they are great value for money and high quality you can rely on.

Features and Benefits


10 A (continuous) current range
Data hold/relative modes
1 MHz counter with full 9999 Count display
Diode test and continuity sounder
4 nF to 40 μF capacitance ranges
Mains proof resistance ranges
Full autoranging with manual override
Auto power shutdown
Digital display update rate 2 per second
Bargraph display update rate 20 per second
Fused 400 mA and 10A ranges
Dust and water protected to IP64
Water resistant via O-Ring sealed case
Dual high energy fuse protection

What does it measure?


DC and AC voltages - up to 1000 V
DC and AC current - up 10A with 10 mA resolution
Resistance and continuity checking - up to 40 MΩ
Capacitance - up to 40 mF
Frequency - up to 400 MHz

Extra Protection


The multimeter is supplied with a protective holster that includes a built-in stand, a nail hook and convenient test lead storage. This holster provides an extra degree of protection and convenience.

Display


The LED-backlit display turns ON/OFF at the touch of a button and automatically turns off to save battery life.

RS-232 Optical Interface


The IDM103N has an RS-232 optical interface to connect to a PC for data acquisition. Allowing measurements to be transferred to a PC for further analysis.

Batteries


Batteries can be easily replaced by unscrewing two screws to remove the battery door for battery replacement. Designed for users convenience without opening the bottom case.

What does it include?


Pair of Test Leads
Test Clips
User Manual
Protective Holster

Typical Applications:
A digital multimeter is a handy test tool that measures electrical values such as voltage, current, and resistance. A DMM is used by technicians in the following areas:
Electrical and electronic industries

Safety guidelines
When using any electrical test equipment it is advised that you refer to the user’s manual for proper working operating procedures and safety precautions in order to avoid potential safety hazards.

What is the difference between an analogue and a digital multimeter?
The main difference is the display. A digital multimeter will show the results as numbers on a screen (usually a LED or LCD screen) whereas the analogue version has a needle to show the value.

Warning

When using test leads or probes, keep your fingers behind the finger guards. Remove test lead from the meter before opening the battery door or meter case.

Liens connexes