RS PRO IDM20 Handheld Digital Multimeter
- N° de stock RS:
- 123-1930
- Fabricant:
- RS PRO
Sous-total (1 unité)*
52,36 €
(TVA exclue)
63,36 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- Plus 8 unité(s) expédiée(s) à partir du 02 juin 2026
- Plus 58 unité(s) expédiée(s) à partir du 02 juin 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 52,36 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 123-1930
- Fabricant:
- RS PRO
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | RS PRO | |
| Multimeter Type | Handheld | |
| Product Type | Multimeter | |
| Model Number | IDM20 | |
| Display Type | Digital | |
| Functions Measured | AC Current, AC Voltage, Capacitance, DC Current, DC Voltage, Resistance | |
| Maximum DC Voltage Measurement | 600V dc | |
| True RMS | No | |
| AC Current Accuracy | ±2.5 % | |
| AC Voltage Accuracy | ±1.2 % rdg | |
| DC Current Accuracy | ±2 % | |
| DC Voltage Accuracy | ±0.5 % | |
| Maximum Frequency | 100kHz | |
| Weight | 145g | |
| Standards/Approvals | No | |
| Height | 40mm | |
| Width | 55mm | |
| Length | 120mm | |
| Safety Category Level | CAT III | |
| Safety Category Voltage | 1000V | |
| Battery Type | AAA | |
| Sélectionner tout | ||
|---|---|---|
Marque RS PRO | ||
Multimeter Type Handheld | ||
Product Type Multimeter | ||
Model Number IDM20 | ||
Display Type Digital | ||
Functions Measured AC Current, AC Voltage, Capacitance, DC Current, DC Voltage, Resistance | ||
Maximum DC Voltage Measurement 600V dc | ||
True RMS No | ||
AC Current Accuracy ±2.5 % | ||
AC Voltage Accuracy ±1.2 % rdg | ||
DC Current Accuracy ±2 % | ||
DC Voltage Accuracy ±0.5 % | ||
Maximum Frequency 100kHz | ||
Weight 145g | ||
Standards/Approvals No | ||
Height 40mm | ||
Width 55mm | ||
Length 120mm | ||
Safety Category Level CAT III | ||
Safety Category Voltage 1000V | ||
Battery Type AAA | ||
- Pays d'origine :
- CN
RS PRO IDM20 Pocket Digital Multimeter
The RS PRO IDM20 digital multimeter (DMM) is a handheld tool which can measure capacitance, voltage, electrical current and resistance with diode and continuity check. This meter has an LCD display where the measurement readouts can be viewed. There is also a “hold” function available in the compact design making it very user-friendly. The multimeter is also CAT IV rated for 600V and CAT III rated for 1000V.
With built-in non-contact AC voltage detection, this battery-powered device is great for continuity and portability. A robust, double-moulded, plastic housing provides ultimate protection from harsh environments. Included with the meter itself are integral test leads, 2 X AAA batteries and a user manual.
The IDM20 is RS Approved, meaning not only is it great value for money, but you can rely on its quality.
Features and Benefits:
• Integrated flashlight
• Compact and handheld - pocket size
• Digital 3-3/4 digit 4000 count LCD display
• 3-year warranty
• 104 x 55 x 32.5 mm dimension
What does it measure?
DC/AC Voltages
AC/DC Current
Resistance and continuity checking
Diode - open circuit voltage
What does it include?
Pair of Integral Test Leads
Battery (Installed) - Two 1.5V AAA batteries
User Manual
Typical Applications:
A digital multimeter (DMM) is a handy test tool that measures electrical values such as voltage, current, and resistance. A DMM is used by technicians in the following areas:
Electrical and electronic industries
Safety guidelines
When using any electrical test equipment it is advised that you refer to the user’s manual for proper working operating procedures and safety precautions in order to avoid potential safety hazards.
What is the difference between an analogue and a digital multimeter?
The main difference is the display. A digital multimeter will show the results as numbers on a screen (usually a LED or LCD screen) whereas the analogue version has a needle to show the value.
Standards
EN61010-1 CAT IV 600 V / CAT III 1000 V