Megger MFT-X1-SC Multifunction Tester, 50V dc , Earth Resistance Measurement

N° de stock RS:: 265-5885
Numéro d'article Distrelec:: 303-74-406
Référence fabricant:: 1012-225
Fabricant:: Megger

Megger MFT-X1-SC Multifunction Tester, 50V dc , Earth Resistance Measurement

Sous-total (1 unité)*

2 190,00 €

(TVA exclue)

2 649,90 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 75,00 €

En stock

1 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Plus 1 unité(s) expédiée(s) à partir du 15 janvier 2026
Plus 2 unité(s) expédiée(s) à partir du 05 février 2026

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité
1 +	2 190,00 €

*Prix donné à titre indicatif

N° de stock RS:: 265-5885
Numéro d'article Distrelec:: 303-74-406
Référence fabricant:: 1012-225
Fabricant:: Megger

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Megger
	Loop Impedance Test Type	High/Low Current
	Automatic RCD Test	Yes
	RCD Ramp Test	Yes
	Model Number p	MFT-X1-SC
	Non-Tripping	Yes
	Insulation Test Voltage	50 V dc, 100 V dc, 250 V dc, 500 V dc, 1000V dc
	Maximum Voltage Measurement	1000V dc
	Test Type	AC Current, AC Voltage, Continuity, DC Current, DC Voltage, Resistance
	Earth Resistance Measurement	Yes
	Downloadable Data	Yes
	RCD Test Type	A, AC, B
	IP Rating	IP54
	Operating Temperature Range	-10 → +55 °C
	Minimum Operating Temperature	-10°C
	Safety Category Voltage	300 V, 600 V
	Weight	1.6kg
	Maximum Continuity Resistance	999kΩ
	Plug Type	Type F - Schuko plug
	Height	143mm
	Dimensions	274 x 96 x 143mm
	Continuity Range	0.01 → 999 k Ω
	Minimum Continuity Resistance	0.01Ω
	Length	274mm
	Power Source	Battery
	Width	96mm
	Voltage Measurement Range	0.001 → 1000V dc
	Safety Category	CAT III 600 V/CAT IV 300 V
	Display Type	TFT
	Maximum Operating Temperature	+55°C
	Battery Type	Li-Ion

	Sélectionner tout
	Marque Megger
	Loop Impedance Test Type High/Low Current
	Automatic RCD Test Yes
	RCD Ramp Test Yes
	Model Number p MFT-X1-SC
	Non-Tripping Yes
	Insulation Test Voltage 50 V dc, 100 V dc, 250 V dc, 500 V dc, 1000V dc
	Maximum Voltage Measurement 1000V dc
	Test Type AC Current, AC Voltage, Continuity, DC Current, DC Voltage, Resistance
	Earth Resistance Measurement Yes
	Downloadable Data Yes
	RCD Test Type A, AC, B
	IP Rating IP54
	Operating Temperature Range -10 → +55 °C
	Minimum Operating Temperature -10°C
	Safety Category Voltage 300 V, 600 V
	Weight 1.6kg
	Maximum Continuity Resistance 999kΩ
	Plug Type Type F - Schuko plug
	Height 143mm
	Dimensions 274 x 96 x 143mm
	Continuity Range 0.01 → 999 k Ω
	Minimum Continuity Resistance 0.01Ω
	Length 274mm
	Power Source Battery
	Width 96mm
	Voltage Measurement Range 0.001 → 1000V dc
	Safety Category CAT III 600 V/CAT IV 300 V
	Display Type TFT
	Maximum Operating Temperature +55°C
	Battery Type Li-Ion

Pays d'origine :: GB

Megger Multifunction Tester, Full-Colour Display, 1mA to 300A Current Measuring Range - MFT-X1 Series

Make electrical commissioning a walk in the park using this multifunction tester from Megger. It's a master of many trades, as its functions mean you need only one instrument to verify the safety of commercial, industrial or residential power installations. Thanks to its stabilised insulation test voltage, you benefit from pinpoint accuracy, with little risk of over-voltage blowing sensitive components. Three-wire non-trip loop testing allows for the precise checking of circuits with high noise interference. Test leads are included so you can get straight to work.

Features & Benefits

• User interface is optimised to give clear visibility in challenging light conditions
• Rotary dials enable easy operation, even when wearing protective gloves
• Supplied with neck strap and durable weatherproof carry case for safe transportation
• Rechargeable batteries reduce battery waste and replacement
• IP54 rating shows it's protected against water spray and limited amounts of dust

Applications

• Electrical engineering
• Maintenance and inspection
• Construction industry

How do I know the tester is functioning correctly?

This instrument's Confidence Meter lets you know the progress of your measurements and indicates where noise is present in a circuit, giving stable and consistent results.