STMicroelectronics, Brushless Motor Driver IC 72-Pin, QFN
- N° de stock RS:
- 229-2099
- Référence fabricant:
- STSPIN32F0251QTR
- Fabricant:
- STMicroelectronics
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
- N° de stock RS:
- 229-2099
- Référence fabricant:
- STSPIN32F0251QTR
- Fabricant:
- STMicroelectronics
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | STMicroelectronics | |
| Product Type | Motor Driver IC | |
| Motor Type | Brushless | |
| Configuration | 3 Phase | |
| Mount Type | Surface | |
| Package Type | QFN | |
| Pin Count | 72 | |
| Output Current | 25mA | |
| Maximum Supply Voltage | 3.6V | |
| Minimum Supply Voltage | -0.3V | |
| Typical Switching Frequency | 800kHz | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 150°C | |
| Standards/Approvals | No | |
| Series | STSPIN32F0251 | |
| Height | 1mm | |
| Length | 10.1mm | |
| Automotive Standard | No | |
| Supply Current | 744μA | |
| Sélectionner tout | ||
|---|---|---|
Marque STMicroelectronics | ||
Product Type Motor Driver IC | ||
Motor Type Brushless | ||
Configuration 3 Phase | ||
Mount Type Surface | ||
Package Type QFN | ||
Pin Count 72 | ||
Output Current 25mA | ||
Maximum Supply Voltage 3.6V | ||
Minimum Supply Voltage -0.3V | ||
Typical Switching Frequency 800kHz | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 150°C | ||
Standards/Approvals No | ||
Series STSPIN32F0251 | ||
Height 1mm | ||
Length 10.1mm | ||
Automotive Standard No | ||
Supply Current 744μA | ||
The STMicroelectronics STSPIN32F0251 is the advanced 250 V three-phase BLDC controller with embedded STM32 MCU.The integrated MCU allows performing FOC, 6-step sensor less and other advanced driving algorithm including the speed control loop. It has WR and RD protection for embedded flash memory to prevent unwanted writing and reading, and it can be put in standby mode to reduce the power consumption.
High voltage rail up to 250 V
Up to 48 MHz clock frequency
4-kByte SRAM with HW parity
32-kByte Flash memory with option bytes
6 general-purpose timers