STMicroelectronics, Brushless Motor Driver IC 72-Pin, QFN
- N° de stock RS:
- 229-2102
- Référence fabricant:
- STSPIN32F0252QTR
- Fabricant:
- STMicroelectronics
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
- N° de stock RS:
- 229-2102
- Référence fabricant:
- STSPIN32F0252QTR
- Fabricant:
- STMicroelectronics
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | STMicroelectronics | |
| Motor Type | Brushless | |
| Product Type | Motor Driver IC | |
| Configuration | 3 Phase | |
| Mount Type | Surface | |
| Package Type | QFN | |
| Output Current | 25mA | |
| Pin Count | 72 | |
| Maximum Supply Voltage | 3.6V | |
| Minimum Supply Voltage | -0.3V | |
| Typical Switching Frequency | 800kHz | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 150°C | |
| Length | 10.1mm | |
| Height | 1mm | |
| Series | STSPIN32F0252 | |
| Standards/Approvals | No | |
| Supply Current | 744μA | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque STMicroelectronics | ||
Motor Type Brushless | ||
Product Type Motor Driver IC | ||
Configuration 3 Phase | ||
Mount Type Surface | ||
Package Type QFN | ||
Output Current 25mA | ||
Pin Count 72 | ||
Maximum Supply Voltage 3.6V | ||
Minimum Supply Voltage -0.3V | ||
Typical Switching Frequency 800kHz | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 150°C | ||
Length 10.1mm | ||
Height 1mm | ||
Series STSPIN32F0252 | ||
Standards/Approvals No | ||
Supply Current 744μA | ||
Automotive Standard No | ||
The STMicroelectronics STSPIN32F0252 is the advanced 250 V three-phase BLDC controller with embedded STM32 MCU. It embeds an MCU featuring an ARM 32-bit Cortex-M0 CPU and a 250V triple half bridge gate driver, able to drive N-channel power MOSFETs or IGBTs. It has WR and RD protection for embedded flash memory to prevent unwanted writing and reading, and it can be put in standby mode to reduce the power consumption.
Up to 48 MHz clock frequency
4-kByte SRAM with HW parity
32-kByte Flash memory with option bytes
6 general-purpose timers
Integrated bootstrap diodes