Toshiba TB67H420FTG(O,EL), Brushed DC Motor DC Motor Driver 48-Pin, VQFN
- N° de stock RS:
- 214-8074
- Référence fabricant:
- TB67H420FTG(O,EL)
- Fabricant:
- Toshiba
Sous-total (1 paquet de 2 unités)*
9,31 €
(TVA exclue)
11,266 €
(TVA incluse)
Informations sur le stock actuellement non accessibles - Veuillez vérifier plus tard
Unité | Prix par unité | le paquet* |
|---|---|---|
| 2 + | 4,655 € | 9,31 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 214-8074
- Référence fabricant:
- TB67H420FTG(O,EL)
- Fabricant:
- Toshiba
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Toshiba | |
| Product Type | DC Motor Driver | |
| Motor Type | Brushed DC Motor | |
| Configuration | Dual | |
| Mount Type | Surface | |
| Package Type | VQFN | |
| Output Current | 9A | |
| Pin Count | 48 | |
| Maximum Supply Voltage | 47V | |
| Minimum Supply Voltage | 10V | |
| Minimum Operating Temperature | -20°C | |
| Maximum Operating Temperature | 85°C | |
| Length | 7mm | |
| Standards/Approvals | RoHS | |
| Series | TB67H420FTG | |
| Height | 1mm | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Toshiba | ||
Product Type DC Motor Driver | ||
Motor Type Brushed DC Motor | ||
Configuration Dual | ||
Mount Type Surface | ||
Package Type VQFN | ||
Output Current 9A | ||
Pin Count 48 | ||
Maximum Supply Voltage 47V | ||
Minimum Supply Voltage 10V | ||
Minimum Operating Temperature -20°C | ||
Maximum Operating Temperature 85°C | ||
Length 7mm | ||
Standards/Approvals RoHS | ||
Series TB67H420FTG | ||
Height 1mm | ||
Automotive Standard No | ||
The Toshiba brushed DC motor driver has sense resistor less current control. The internal H-bridge can be controlled independently, as a two brushed DC motor driver or a single stepping motor driver using the dual H-bridge mode. This IC is fabricated with the BiCD process and is rated at 50 V, 9.0 A
Supporting large current (9.0 A) and high voltage (50 V) brushed DC motor operation
Capable of driving two brushed DC motors using dual H-Bridge mode
Capable of driving one stepping motor using dual H-bridge mode
Built-in sense resistor less current control. (ACDS: Advanced Current Detection System)
Low Rds (on) MOSFETs (High side+ Low side=0.33 Ω (typ.))
Error detection features (Thermal shutdown (TSD), Over current detection (ISD), Power-on-reset (POR), and Motor load open detection (OPD))
Error detection signal output (Error Output)
Internal VCC (5 V) regulator enables the driver to be operated with a single power supply (VM)
Adjustable constant current PWM frequency using external components
Small package with thermal pad. (QFN48: 7.0 mm x 7.0 mm)