STMicroelectronics L6228PDTR, Stepper Motor Driver IC 36-Pin, SO-8
- N° de stock RS:
- 188-8482
- Référence fabricant:
- L6228PDTR
- Fabricant:
- STMicroelectronics
Sous-total (1 paquet de 2 unités)*
11,06 €
(TVA exclue)
13,38 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- Plus 2 390 unité(s) expédiée(s) à partir du 04 mai 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | le paquet* |
|---|---|---|
| 2 + | 5,53 € | 11,06 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 188-8482
- Référence fabricant:
- L6228PDTR
- Fabricant:
- STMicroelectronics
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | STMicroelectronics | |
| Motor Type | Stepper | |
| Product Type | Motor Driver IC | |
| Configuration | Full Bridge | |
| Mount Type | Surface | |
| Package Type | SO-8 | |
| Pin Count | 36 | |
| Output Current | 1.4A | |
| Minimum Supply Voltage | 8V | |
| Maximum Supply Voltage | 52V | |
| Minimum Operating Temperature | -40°C | |
| Typical Switching Frequency | 100kHz | |
| Maximum Operating Temperature | 150°C | |
| Height | 3.3mm | |
| Length | 16mm | |
| Series | L6228 | |
| Standards/Approvals | No | |
| Automotive Standard | No | |
| Supply Current | 1.4A | |
| Sélectionner tout | ||
|---|---|---|
Marque STMicroelectronics | ||
Motor Type Stepper | ||
Product Type Motor Driver IC | ||
Configuration Full Bridge | ||
Mount Type Surface | ||
Package Type SO-8 | ||
Pin Count 36 | ||
Output Current 1.4A | ||
Minimum Supply Voltage 8V | ||
Maximum Supply Voltage 52V | ||
Minimum Operating Temperature -40°C | ||
Typical Switching Frequency 100kHz | ||
Maximum Operating Temperature 150°C | ||
Height 3.3mm | ||
Length 16mm | ||
Series L6228 | ||
Standards/Approvals No | ||
Automotive Standard No | ||
Supply Current 1.4A | ||
The L6228 device is a DMOS fully integrated stepper motor driver with non-dissipative overcurrent protection, realized in BCD technology, which combines isolated DMOS power transistors with CMOS and bipolar circuits on the same chip. The device includes all the circuitry needed to drive a two phase bipolar stepper motor including: a dual DMOS full bridge, the constant off time PWM current controller that performs the chopping regulation and the phase sequence generator, that generates the stepping sequence. Available in PowerSO36 and SO24 (20 + 2 + 2) packages, the L6228 device features a non-dissipative overcurrent protection on the high-side power MOSFETs and thermal shutdown.
Operating supply voltage from 8 to 52 V
2.8 A output peak current (1.4 A RMS)
RDS(ON) 0.73 Ω typ. value at Tj = 25 °C
Operating frequency up to 100 KHz
Non-dissipative overcurrent protection
Dual independent constant tOFF PWM current controllers
Fast/slow decay mode selection
Fast decay quasi-synchronous rectification
Decoding logic for stepper motor full and half step drive
Cross conduction protection
Thermal shutdown
Undervoltage lockout
Integrated fast freewheeling diodes
Application
Bipolar stepper motor