STMicroelectronics L6472PDTR, Stepper Motor Driver IC 36-Pin, PowerSO-36
- N° de stock RS:
- 330-271
- Référence fabricant:
- L6472PDTR
- Fabricant:
- STMicroelectronics
Offre groupée disponible
Consulter les options de prix de grosSous-total (1 unité)*
9,85 €
(TVA exclue)
11,92 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 1 200 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 9 | 9,85 € |
| 10 - 24 | 7,70 € |
| 25 - 99 | 7,16 € |
| 100 - 249 | 6,58 € |
| 250 + | 6,37 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 330-271
- Référence fabricant:
- L6472PDTR
- Fabricant:
- STMicroelectronics
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | STMicroelectronics | |
| Motor Type | Stepper | |
| Product Type | Motor Driver IC | |
| Mount Type | Surface | |
| Package Type | PowerSO-36 | |
| Output Current | 7A | |
| Pin Count | 36 | |
| Minimum Supply Voltage | 8V | |
| Maximum Supply Voltage | 45V | |
| Minimum Operating Temperature | -40°C | |
| Typical Switching Frequency | 15.6kHz | |
| Maximum Operating Temperature | 150°C | |
| Series | L6472 | |
| Standards/Approvals | RoHS | |
| Supply Current | 3.7mA | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque STMicroelectronics | ||
Motor Type Stepper | ||
Product Type Motor Driver IC | ||
Mount Type Surface | ||
Package Type PowerSO-36 | ||
Output Current 7A | ||
Pin Count 36 | ||
Minimum Supply Voltage 8V | ||
Maximum Supply Voltage 45V | ||
Minimum Operating Temperature -40°C | ||
Typical Switching Frequency 15.6kHz | ||
Maximum Operating Temperature 150°C | ||
Series L6472 | ||
Standards/Approvals RoHS | ||
Supply Current 3.7mA | ||
Automotive Standard No | ||
- Pays d'origine :
- MY
The STMicroelectronics fully integrated micro stepping motor driver with motion engine and SPI are analog mixed signal technology, is an advanced fully integrated solution suitable for driving two-phase bipolar stepper motors with micro stepping. It integrates a dual low RDS(on)DMOS full bridge with all of the power switches equipped with an accurate on-chip current sensing circuitry suitable for non dissipative current control and overcurrent protection. Thanks to a new current control, a 1/16 micro stepping is achieved through an adaptive decay mode which outperforms traditional implementations. The digital control core can generate user defined motion profiles with acceleration, deceleration, speed or target position, easily programmed through a dedicated register set.
Programmable speed profile
Programmable power MOSFET slew rate
Up to 1 or 16 micro stepping
Predictive current control with adaptive decay
Non dissipative current sensing
SPI interface
Low quiescent and standby currents
Liens connexes
- STMicroelectronics PowerSO
- STMicroelectronics L6470PD PowerSO
- STMicroelectronics 45 V 3 A 36-Pin, PowerSO
- STMicroelectronics 52 V 2.8 A 36-Pin, PowerSO
- STMicroelectronics L6474PD 45 V 3 A 36-Pin, PowerSO
- STMicroelectronics L6472PD 45 V 3 A 36-Pin, PowerSO
- STMicroelectronics L6208PD013TR 52 V 2.8 A 36-Pin, PowerSO
- STMicroelectronics 40 V 1.5 A 36-Pin, PowerSO
