ROHM BD62105AFVM-TR, Brushed DC Motor Motor Driver IC 8-Pin, MSOP
- N° de stock RS:
- 178-0637
- Référence fabricant:
- BD62105AFVM-TR
- Fabricant:
- ROHM
Offre groupée disponible
Consulter les options de prix de grosSous-total (1 paquet de 10 unités)*
12,00 €
(TVA exclue)
14,50 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 22 février 2027
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | le paquet* |
|---|---|---|
| 10 - 40 | 1,20 € | 12,00 € |
| 50 - 90 | 1,079 € | 10,79 € |
| 100 - 240 | 0,982 € | 9,82 € |
| 250 - 990 | 0,902 € | 9,02 € |
| 1000 + | 0,83 € | 8,30 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 178-0637
- Référence fabricant:
- BD62105AFVM-TR
- Fabricant:
- ROHM
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | ROHM | |
| Motor Type | Brushed DC Motor | |
| Product Type | Motor Driver IC | |
| Configuration | H Bridge | |
| Mount Type | Surface | |
| Package Type | MSOP | |
| Output Current | 1A | |
| Pin Count | 8 | |
| Minimum Supply Voltage | 8V | |
| Maximum Supply Voltage | 28V | |
| Typical Switching Frequency | 100kHz | |
| Minimum Operating Temperature | -25°C | |
| Maximum Operating Temperature | 85°C | |
| Width | 2.8mm | |
| Series | BD62105AFVM | |
| Standards/Approvals | No | |
| Length | 2.9mm | |
| Height | 750μm | |
| Inverter Power Rating | 0.59W | |
| Supply Current | 2.5mA | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque ROHM | ||
Motor Type Brushed DC Motor | ||
Product Type Motor Driver IC | ||
Configuration H Bridge | ||
Mount Type Surface | ||
Package Type MSOP | ||
Output Current 1A | ||
Pin Count 8 | ||
Minimum Supply Voltage 8V | ||
Maximum Supply Voltage 28V | ||
Typical Switching Frequency 100kHz | ||
Minimum Operating Temperature -25°C | ||
Maximum Operating Temperature 85°C | ||
Width 2.8mm | ||
Series BD62105AFVM | ||
Standards/Approvals No | ||
Length 2.9mm | ||
Height 750μm | ||
Inverter Power Rating 0.59W | ||
Supply Current 2.5mA | ||
Automotive Standard No | ||
- Pays d'origine :
- TH
BD62105AFVM is a built-in 1 channel H-bridge motor driver for DC brush motors. This driver can facilitate low power consumption by direct PWM. There are built in protection circuits in this IC. Each protection circuit operation, which contributes to set high reliability.
Single Power Supply Input (rated voltage of 36V)
Rated Output Current (peak):0.5A(1.0A)
Low ON-Resistance DMOS Output
Forward, Reverse, Brake, Open
Power Save Function
External PWM Control
Driver for DC Brush Motor
Built-in logic input pull-down resistor
Cross-conduction Prevention Circuit
Thermal Shutdown Circuit (TSD)
Over-current Protection Circuit (OCP)
Under Voltage Lock out Circuit (UVLO)
Over Voltage Lock out Circuit (OVLO)
Ghost Supply Prevention (protects against malfunction when power supply is disconnected)
Adjacent Pins Short Protection
Inverted Mounting Protection
MSOP8 package