ROHM BD62105AFVM-TR, Brushed DC Motor Motor Driver IC 8-Pin, MSOP
- N° de stock RS:
- 178-0019
- Référence fabricant:
- BD62105AFVM-TR
- Fabricant:
- ROHM
Sous-total (1 bobine de 3000 unités)*
2 457,00 €
(TVA exclue)
2 973,00 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 25 février 2027
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | la bobine* |
|---|---|---|
| 3000 + | 0,819 € | 2 457,00 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 178-0019
- Référence fabricant:
- BD62105AFVM-TR
- Fabricant:
- ROHM
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | ROHM | |
| Motor Type | Brushed DC Motor | |
| Product Type | Motor Driver IC | |
| Configuration | H Bridge | |
| Mount Type | Surface | |
| Package Type | MSOP | |
| Pin Count | 8 | |
| Output Current | 1A | |
| Minimum Supply Voltage | 8V | |
| Maximum Supply Voltage | 28V | |
| Minimum Operating Temperature | -25°C | |
| Typical Switching Frequency | 100kHz | |
| Maximum Operating Temperature | 85°C | |
| Height | 750μm | |
| Series | BD62105AFVM | |
| Width | 2.8mm | |
| Standards/Approvals | No | |
| Length | 2.9mm | |
| Inverter Power Rating | 0.59W | |
| Supply Current | 2.5mA | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque ROHM | ||
Motor Type Brushed DC Motor | ||
Product Type Motor Driver IC | ||
Configuration H Bridge | ||
Mount Type Surface | ||
Package Type MSOP | ||
Pin Count 8 | ||
Output Current 1A | ||
Minimum Supply Voltage 8V | ||
Maximum Supply Voltage 28V | ||
Minimum Operating Temperature -25°C | ||
Typical Switching Frequency 100kHz | ||
Maximum Operating Temperature 85°C | ||
Height 750μm | ||
Series BD62105AFVM | ||
Width 2.8mm | ||
Standards/Approvals No | ||
Length 2.9mm | ||
Inverter Power Rating 0.59W | ||
Supply Current 2.5mA | ||
Automotive Standard No | ||
- Pays d'origine :
- JP
BD62105AFVM is a built-in 1 channel H-bridge motor driver for DC brush motors. This driver can facilitate low power consumption by direct PWM. There are built in protection circuits in this IC. Each protection circuit operation, which contributes to set high reliability.
Single Power Supply Input (rated voltage of 36V)
Rated Output Current (peak):0.5A(1.0A)
Low ON-Resistance DMOS Output
Forward, Reverse, Brake, Open
Power Save Function
External PWM Control
Driver for DC Brush Motor
Built-in logic input pull-down resistor
Cross-conduction Prevention Circuit
Thermal Shutdown Circuit (TSD)
Over-current Protection Circuit (OCP)
Under Voltage Lock out Circuit (UVLO)
Over Voltage Lock out Circuit (OVLO)
Ghost Supply Prevention (protects against malfunction when power supply is disconnected)
Adjacent Pins Short Protection
Inverted Mounting Protection
MSOP8 package