STMicroelectronics STSPIN240, Brushed DC Motor Low voltage Dual Brush DC motor Driver 16-Pin, QFN
- N° de stock RS:
- 162-3647
- Référence fabricant:
- STSPIN240
- Fabricant:
- STMicroelectronics
Sous-total (1 paquet de 5 unités)*
5,90 €
(TVA exclue)
7,15 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 6 490 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | le paquet* |
|---|---|---|
| 5 + | 1,18 € | 5,90 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 162-3647
- Référence fabricant:
- STSPIN240
- Fabricant:
- STMicroelectronics
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | STMicroelectronics | |
| Motor Type | Brushed DC Motor | |
| Product Type | Low voltage Dual Brush DC motor Driver | |
| Configuration | H Bridge | |
| Mount Type | Surface | |
| Package Type | QFN | |
| Output Current | 1.3A | |
| Pin Count | 16 | |
| Minimum Supply Voltage | 1.8V | |
| Maximum Supply Voltage | 10V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 150°C | |
| Standards/Approvals | ECOPACK | |
| Series | STSPIN | |
| Width | 3.15mm | |
| Height | 0.98mm | |
| Length | 3.15mm | |
| Automotive Standard | No | |
| Supply Current | 1.3mA | |
| Sélectionner tout | ||
|---|---|---|
Marque STMicroelectronics | ||
Motor Type Brushed DC Motor | ||
Product Type Low voltage Dual Brush DC motor Driver | ||
Configuration H Bridge | ||
Mount Type Surface | ||
Package Type QFN | ||
Output Current 1.3A | ||
Pin Count 16 | ||
Minimum Supply Voltage 1.8V | ||
Maximum Supply Voltage 10V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 150°C | ||
Standards/Approvals ECOPACK | ||
Series STSPIN | ||
Width 3.15mm | ||
Height 0.98mm | ||
Length 3.15mm | ||
Automotive Standard No | ||
Supply Current 1.3mA | ||
The STSPIN240 is a dual brush DC motor driver integrating a low RDS(ON) power stage in a small QFN 3 x 3 mm package.Both the full-bridges implement an independent PWM current controller with fixed OFF time.The device is designed to operate in battery-powered scenarios and can be forced into a zero- consumption state allowing a significant increase in battery life.The device offers a complete set of protection features including overcurrent, overtemperature and short-circuit protection
Operating voltage from 1.8 to 10 V
Maximum output current 1.3 Arms
RDS(ON) HS + LS = 0.4 Ω typ.
Current control with programmable off-time
Full protection set
Non-dissipative overcurrent protection
Short-circuit protection
Thermal shutdown
Energy saving and long battery life with standby consumption less than 80 nA