ROHM BD62222HFP-TR, Brushed DC Motor Dual Full Bridge Motor Driver 7-Pin, HRP7
- N° de stock RS:
- 146-7681
- Référence fabricant:
- BD62222HFP-TR
- Fabricant:
- ROHM
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
- N° de stock RS:
- 146-7681
- Référence fabricant:
- BD62222HFP-TR
- Fabricant:
- ROHM
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | ROHM | |
| Motor Type | Brushed DC Motor | |
| Product Type | Dual Full Bridge Motor Driver | |
| Configuration | H Bridge | |
| Mount Type | Surface | |
| Package Type | HRP7 | |
| Pin Count | 7 | |
| Output Current | 2.5A | |
| Maximum Supply Voltage | 30V | |
| Minimum Supply Voltage | 6V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Series | BD62222HFP | |
| Standards/Approvals | RoHS | |
| Width | 8mm | |
| Height | 1.9mm | |
| Length | 9.39mm | |
| Supply Current | 1.4mA | |
| Sélectionner tout | ||
|---|---|---|
Marque ROHM | ||
Motor Type Brushed DC Motor | ||
Product Type Dual Full Bridge Motor Driver | ||
Configuration H Bridge | ||
Mount Type Surface | ||
Package Type HRP7 | ||
Pin Count 7 | ||
Output Current 2.5A | ||
Maximum Supply Voltage 30V | ||
Minimum Supply Voltage 6V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Series BD62222HFP | ||
Standards/Approvals RoHS | ||
Width 8mm | ||
Height 1.9mm | ||
Length 9.39mm | ||
Supply Current 1.4mA | ||
- Pays d'origine :
- JP
BD62222HFP is full bridge driver for brush motor applications. This IC can operate at a wide range of power-supply voltages (from 6V to 27V), supporting output currents of up to 2.5A. MOS transistors in the output stage allow for PWM signal control. The replacement is also easy because of the pin compatible with BD623XHFP series
Built-in one channel driver
Low standby current
Supports PWM control signal input (20kHz to 100kHz)
Cross-conduction prevention circuit
Four protection circuits provided: OCP, OVP, TSD and UVLO