Electromen OY DC Motor Controller, 10 → 35 V dc, 20 A, 12 V dc, 24 V dc
- N° de stock RS:
- 773-6838
- Référence fabricant:
- EM-285
- Fabricant:
- Electromen OY
Sous-total (1 unité)*
184,49 €
(TVA exclue)
223,23 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 3 unité(s) prête(s) à être expédiée(s)
- Plus 15 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 184,49 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 773-6838
- Référence fabricant:
- EM-285
- Fabricant:
- Electromen OY
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Electromen OY | |
| Supply Voltage | 10 → 35 V dc | |
| Current Rating | 20 A | |
| Voltage Rating | 12 V dc, 24 V dc | |
| Sélectionner tout | ||
|---|---|---|
Marque Electromen OY | ||
Supply Voltage 10 → 35 V dc | ||
Current Rating 20 A | ||
Voltage Rating 12 V dc, 24 V dc | ||
- Pays d'origine :
- FI
EM-285 DC-Motor Speed Regulator
EM-285 is a PWM-based DC-motor driver. The materials and features meet the industrial standards.
Motor voltage is regulated against supply voltage changes, and there is also a load compensation adjustment (RxI), which enables steady speed during motor loading.
Motor voltage is regulated against supply voltage changes, and there is also a load compensation adjustment (RxI), which enables steady speed during motor loading.
Speed continuous to 1-direction
Motor size 30-200W
Good speed regulation
Load compensation adjustable RxI
Adjustable current limit
Overheating protection
Panel mountable
Small size
EMC tested
Motor size 30-200W
Good speed regulation
Load compensation adjustable RxI
Adjustable current limit
Overheating protection
Panel mountable
Small size
EMC tested
Electromen - EM-285 20A 12-32VDC, POTENTIOMETER DRIVE BOARD
The EM-285 is a PWM-based DC-motor driver developed for industrial environment applications. The unit is packaged for very easy panel mounting by means of a Ø10mm through holeThe drive has very low RF emissions and is suitable for use in in critical electromagnetic environments including medicalMotor voltage is regulated against supply voltage changes and also offers load compensation adjustment. Current limit and speed range are adjusted with onboard trim pots.
The power stage of the device is protected against short-circuit and over temperature situations
The power stage of the device is protected against short-circuit and over temperature situations
Features and Benefits
12-24Vdc, 20A continuous, 30A peak
Speed control without loss of torque
Adjustable current limit
Direct mounting to control panel
Speed control without loss of torque
Adjustable current limit
Direct mounting to control panel
Smooth PWM speed regulation
Suitable for 30-200W brushed DC motors
Easy direct mounting to panel (Ø10mm hole)
Load compensation
Adjustable current limit
Overload and short-circuit protection
Low RF emissions
Compact size
Suitable for 30-200W brushed DC motors
Easy direct mounting to panel (Ø10mm hole)
Load compensation
Adjustable current limit
Overload and short-circuit protection
Low RF emissions
Compact size
Liens connexes
- Electromen OY DC Motor Controller 4 A, 35 V
- Electromen OY DC Motor Controller 15 A, 35 V
- Electromen OY DC Motor Controller 4 A, 35 V dc
- Electromen OY DC Motor Controller 10 A, 35 V dc
- Electromen OY DC Motor Controller 6 A, 35 V dc
- Electromen OY DC Motor Controller 3 A, 35 V dc
- Electromen OY DC Motor Controller 2 A, 35 V dc
- Electromen OY DC Motor Controller 15 A, 12 → 24 V dc