Electromen OY DC Motor Controller, 12V dc, 36 V dc, 3 Phase, 10A, Potentiometer Function

Voir la catégorie

Sous-total (1 unité)*

210,56 €

(TVA exclue)

254,78 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
En stock
  • 2 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité
Prix par unité
1 +210,56 €

*Prix donné à titre indicatif

N° de stock RS:
773-6832
Référence fabricant:
EM-206
Fabricant:
Electromen OY
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

Electromen OY

Product Type

DC Motor Controller

Number of Phases

3

Control Function

Potentiometer

Output Voltage

12, 24V dc

Supply Voltage

12, 36V dc

Current Rating

10A

Overall Length

43mm

Overall Width

73mm

Overall Depth

30mm

Standards/Approvals

No

Pays d'origine :
FI

Electromen - EM-206 BLDC MOTOR CONTROLLER 12-36 V DC, 10A


The EM-206 is a DC-motor controller designed for brushless motors with hall sensor feedback (60º or 120º commutation).High efficiency is achieved by using a MOSFET power stage and RF emissions are very low.

The unit is allows control of speed, direction and braking, speed control is set using external inputs or the on board trim pots

There are open and closed loop control modes - open loop (direct control) sets the motor voltage proportional to the control voltage and closed loop mode uses hall sensor feedback for more accurate speed control

Current limit restricts motor torque when motor current exceeds the set value, this can be adjusted with trim pot or with an external signal

Fault output indicates current limit, under voltage and sensor faults

The optional EM-A1 expansion card can be installed to provide symmetrical control with the an external ±10V signal

Features and Benefits


Three phase output

Highly efficient with very low EMC emissions

Continuous speed adjustment

Reversing and braking control

Symmetrical control (rev-stop-fwd) option ±10V

Fault output

Open/closed loop modes

DIN rail mountable;12-36Vdc, 10A continuous, 15A peak

Open & closed loop control operation with hall sensor feedback

Speed, direction, current limiting, soft start/stop and braking control

Compact and DIN rail mountable

Symmetrical control (rev-stop-fwd) can be achieved with EM-A1 card option

EM-206 Brushless Motor Controller


EM-206 is a DC-motor controller that is designed for brushless motors with hall sensor feedback. The unit has a mosfet-type high efficiency power stage. The unit is equipped with standard controls, such as speed, stop, reversing and braking.

Three phase output

Continuous speed adjustment

Reversing

Braking

Hall sensor supply and input

60º or 120º commutation

Settable / controllable current limit

Fault output

Open or closed loop activity

High efficiency

Rail base mountable

DC Drives - Brushless

Liens connexes