Electromen OY DC Motor Controller, 12V dc, 24 V dc, 3A
- N° de stock RS:
- 510-1215
- Référence fabricant:
- EM185
- Fabricant:
- Electromen OY
Sous-total (1 unité)*
152,12 €
(TVA exclue)
184,07 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 8 unité(s) prête(s) à être expédiée(s)
- Plus 37 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 152,12 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 510-1215
- Référence fabricant:
- EM185
- Fabricant:
- Electromen OY
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Electromen OY | |
| Product Type | DC Motor Controller | |
| Supply Voltage | 12, 24V dc | |
| Output Voltage | 35V | |
| Current Rating | 3A | |
| Overall Length | 38mm | |
| Overall Width | 37mm | |
| Overall Depth | 30mm | |
| Minimum Operating Temperature | 0°C | |
| Maximum Operating Temperature | 60°C | |
| Standards/Approvals | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Electromen OY | ||
Product Type DC Motor Controller | ||
Supply Voltage 12, 24V dc | ||
Output Voltage 35V | ||
Current Rating 3A | ||
Overall Length 38mm | ||
Overall Width 37mm | ||
Overall Depth 30mm | ||
Minimum Operating Temperature 0°C | ||
Maximum Operating Temperature 60°C | ||
Standards/Approvals No | ||
- Pays d'origine :
- FI
Electromen - EM-185 3A 12-32VDC POTENTIOMETER DRIVE BOARD
The EM-185 is a PWM-based DC-motor driver developed for industrial environment applications. The unit is packaged for very easy panel mounting by means of a Ø10mm through hole.The drive has very low RF emissions and is suitable for use in in critical electromagnetic environments including medical.Motor voltage is regulated against supply voltage changes and also offers load compensation adjustment.Current limit and speed range are adjusted with onboard trim pots.
The power stage of the device is protected against short-circuit and over temperature situations
Features and Benefits
12-24Vdc, 3A continuous, 6A peak
Speed control without loss of torque
Adjustable current limit
Direct mounting to control panel;Smooth PWM speed regulation
Suitable for 5-80W brushed DC motors
Easy direct mounting to panel (Ø10mm hole)
Load compensation
Adjustable current limit
Overload and short-circuit protection
Low RF emissions
Compact size
EM-185 DC Motor Speed Regulator
The motor drive is a PWM-based DC-motor driver. The materials and features meet the industrial environment requirements. The device is CE marked and has been tested through EMC measurements required by industrial environment.Motor voltage is regulated against supply voltage changes, and there is also a load compensation (RxI) adjustment. Thanks to these features drive offers good performance in motor speed control applications. The current limit and the rpm range are adjustable with trimmer potentiometers. The power stage of the device is protected against short-circuit and overload (over temp.).The drive is easy to mount in a 10mm hole in an assembly panel.
Features & Benefits
1 Quadrant
Panel mountable
Small size
Motor power 5-80W
Load compensation Rxl
Adjustable current limit
EMC tested (CE marked)
Overload and short circuit protected
Liens connexes
- Electromen OY DC Motor Controller 35 V dc, 3A
- Electromen OY DC Motor Controller 32 V dc, 8A
- Electromen OY DC Motor Controller 35 V dc, 6A
- Electromen OY DC Motor Controller 32 V dc, 15A
- Electromen OY DC Motor Controller 35 V dc Potentiometer Function
- Electromen OY DC Motor Controller 48 V dc Potentiometer Function
- Electromen OY DC Motor Controller 32 V dc Potentiometer Function
- Electromen OY DC Motor Controller 36 V dc 10A, Potentiometer Function