Applied Motion Systems Stepper Motor Controller, 10 A
- N° de stock RS:
- 455-863
- Référence fabricant:
- ST10-SI
- Fabricant:
- Applied Motion Systems
Sous-total (1 unité)*
1 062,30 €
(TVA exclue)
1 285,38 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 3 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 1 062,30 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 455-863
- Référence fabricant:
- ST10-SI
- Fabricant:
- Applied Motion Systems
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Applied Motion Systems | |
| Current Rating | 10 A | |
| Overall Length | 127mm | |
| Overall Width | 76mm | |
| Overall Depth | 44.5mm | |
Sélectionner tout | ||
|---|---|---|
Marque Applied Motion Systems | ||
Current Rating 10 A | ||
Overall Length 127mm | ||
Overall Width 76mm | ||
Overall Depth 44.5mm | ||
- Pays d'origine :
- US
ST5-Si and ST10-Si Programmable Stepper Drive
ST5-Si and ST10-Si programmable step drives offer the following features:
Software setup using ST Configurator (software included)
Microstepping 200 to 58000 steps/rev.
Pulse and direction: pulse/direction, CW/CCW, A/B quadrature
Host control mode
Idle current reduction
Anti-resonance
Torque ripple smoothing
Microstep emulation
8 digital inputs
4 digital outputs
May be fitted with option boards to provide an encoder feedback option (ST-ENC, stock no. 455-857) and RS-485 option (ST-RS485, stock no. 455-835)
Microstepping 200 to 58000 steps/rev.
Pulse and direction: pulse/direction, CW/CCW, A/B quadrature
Host control mode
Idle current reduction
Anti-resonance
Torque ripple smoothing
Microstep emulation
8 digital inputs
4 digital outputs
May be fitted with option boards to provide an encoder feedback option (ST-ENC, stock no. 455-857) and RS-485 option (ST-RS485, stock no. 455-835)
Liens connexes
- Applied Motion Systems Stepper Motor Controller, 10 A
- Applied Motion Systems Stepper Motor Controller, 5 A
- Applied Motion Systems Stepper Motor Controller 24 → 80 V dc
- Applied Motion Systems Encoder for Use with ST10-Si, ST5-Si
- Applied Motion Systems Network Module for Use with ST10-Si, ST5-Si
- Applied Motion Systems Stepper Motor Controller 12 → 48 V dc
- Applied Motion Systems Stepper Motor Controller 24 → 48 V dc
- Applied Motion Systems STM Series Dual Hybridge Stepper Motor 12 → 70 V 42mm Frame,
