Honeywell Through Hole Hall Effect Sensor 2.7 V 6.5 V, TO-92, 3-Pin
- N° de stock RS:
- 236-2760
- Référence fabricant:
- SS49E
- Fabricant:
- Honeywell
Sous-total (1 sachet de 1000 unités)*
5 078,00 €
(TVA exclue)
6 144,00 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 1 000 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | Le Sachet* |
|---|---|---|
| 1000 + | 5,078 € | 5 078,00 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 236-2760
- Référence fabricant:
- SS49E
- Fabricant:
- Honeywell
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Honeywell | |
| Product Type | Hall Effect Sensor | |
| Sensor Type | Insulated Winding | |
| Technology | Hall Effect | |
| Mount Type | Through Hole | |
| Magnetic Type | Analogue | |
| Minimum Supply Voltage | 2.7V | |
| Package Type | TO-92 | |
| Maximum Supply Voltage | 6.5V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 100°C | |
| Pin Count | 3 | |
| Height | 1.7mm | |
| Width | 3 mm | |
| Length | 4.06mm | |
| Standards/Approvals | No | |
| Series | SS | |
| Automotive Standard | No | |
| Supply Current | 6mA | |
| Response Time | 3s | |
| Sélectionner tout | ||
|---|---|---|
Marque Honeywell | ||
Product Type Hall Effect Sensor | ||
Sensor Type Insulated Winding | ||
Technology Hall Effect | ||
Mount Type Through Hole | ||
Magnetic Type Analogue | ||
Minimum Supply Voltage 2.7V | ||
Package Type TO-92 | ||
Maximum Supply Voltage 6.5V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 100°C | ||
Pin Count 3 | ||
Height 1.7mm | ||
Width 3 mm | ||
Length 4.06mm | ||
Standards/Approvals No | ||
Series SS | ||
Automotive Standard No | ||
Supply Current 6mA | ||
Response Time 3s | ||
- Pays d'origine :
- CN
The Honeywell SS39ET series has low-cost linear hall-effect sensor ICs are small, versatile devices that are operated by the magnetic field from a permanent magnet or an electromagnet. They are designed and manufactured for cost competitiveness. The linear sourcing output voltage is set by the supply voltage and varies in proportion to the strength of the magnetic field. It has low voltage capability as low as 2.7 Vdc and reduced current consumption of only 6 mA typically at 5 Vdc help make this product energy efficient.
Miniature and sub miniature construction
Energy efficient
Low noise output
Temperature range of -40 °C to 100 °C
Single current sourcing output for common electronic circuits
Liens connexes
- Honeywell Through Hole Hall Effect Sensor 2.7 V 6.5 V 3-Pin
- Honeywell Surface Hall Effect Sensor 2.7 V 6.5 V 3-Pin
- Honeywell Through Hole Bipolar Hall Effect Digital Position Sensor 2.7 V 7 V TO-92, 3-Pin
- Honeywell Surface Hall Effect Sensor 4.5 V 10.5 V 3-Pin
- Honeywell Through Hole Hall Effect Sensor 4.5 V 10.5 V 3-Pin
- Honeywell Through Hole Hall Effect Sensor 3.8 V 30 V TO-92, 3-Pin
- Honeywell Through Hole Hall Effect Sensor 3.8 V 30 V TO-92, 3-Pin
- Honeywell Through Hole Hall Effect Sensor 3 V 28 V TO-92, 3-Pin