Melexis Surface Hall Switch 3.5 V 24 V, TSOT, 23-Pin
- N° de stock RS:
- 194-2968
- Référence fabricant:
- US5781ESE-AAA-000-RE
- Fabricant:
- Melexis
Sous-total (1 paquet de 10 unités)*
3,25 €
(TVA exclue)
3,93 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- Plus 19 840 unité(s) expédiée(s) à partir du 09 janvier 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | le paquet* |
|---|---|---|
| 10 + | 0,325 € | 3,25 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 194-2968
- Référence fabricant:
- US5781ESE-AAA-000-RE
- Fabricant:
- Melexis
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Melexis | |
| Product Type | Hall Switch | |
| Sensor Type | Hall Effect Sensors | |
| Technology | CMOS | |
| Mount Type | Surface | |
| Magnetic Type | Unipolar | |
| Maximum Frequency Response | 10kHz | |
| Minimum Supply Voltage | 3.5V | |
| Package Type | TSOT | |
| Maximum Supply Voltage | 24V | |
| Minimum Operating Temperature | -40°C | |
| Pin Count | 23 | |
| Maximum Operating Temperature | 85°C | |
| Series | US5781 | |
| Width | 1.7 mm | |
| Length | 3mm | |
| Height | 0.9mm | |
| Standards/Approvals | RoHS | |
| Automotive Standard | No | |
| Supply Current | 5mA | |
| Sélectionner tout | ||
|---|---|---|
Marque Melexis | ||
Product Type Hall Switch | ||
Sensor Type Hall Effect Sensors | ||
Technology CMOS | ||
Mount Type Surface | ||
Magnetic Type Unipolar | ||
Maximum Frequency Response 10kHz | ||
Minimum Supply Voltage 3.5V | ||
Package Type TSOT | ||
Maximum Supply Voltage 24V | ||
Minimum Operating Temperature -40°C | ||
Pin Count 23 | ||
Maximum Operating Temperature 85°C | ||
Series US5781 | ||
Width 1.7 mm | ||
Length 3mm | ||
Height 0.9mm | ||
Standards/Approvals RoHS | ||
Automotive Standard No | ||
Supply Current 5mA | ||
The US5781 is a unipolar Hall-effect switch designed in mixed signal CMOS technology.
The device integrates a voltage regulator, Hall sensor with dynamic offset cancellation system, Schmitt trigger and an open-drain output driver, all in a single package.
Thanks to its wide operating voltage range and extended choice of temperature range, it is suitable for use in automotive and solid state switch applications.
The device is delivered in a TSOT for surface mount process and in a Plastic Single In Line (TO-92 flat) for through-hole mount.
Wide operating voltage range from 3.5 V to 24 V
Medium sensitivity
CMOS technology
Chopper-stabilized amplifier stage
Low current consumption
Open drain output
Thin SOT23 3L and flat TO-92 3L both packages
SE package North pole active
UA package South pole active
Liens connexes
- Melexis Surface Hall Switch 3.5 V 24 V 23-Pin
- Melexis Surface Hall Effect Sensor 3.5 V 24 V 23-Pin
- Melexis Surface Hall Effect Sensor 3.5 V 24 V 3-Pin
- Melexis Surface Hall Effect Sensor 1.5 V 3.6 V 3-Pin
- Melexis Surface Hall Effect Sensor 1.6 V 3.6 V 6-Pin
- Melexis Through Hole Hall Effect Latch 3.5 V 24 V 3-Pin
- Melexis 1-Axis Through Hole Hall Effect Sensor 3.5 V 24 V 3-Pin
- Melexis 3-Axis Surface Hall Effect Sensor 2.2 V 3.6 V QFN, 16-Pin
