Melexis Surface Hall Effect Sensor 1.6 V 3.6 V, UTQFN, 6-Pin
- N° de stock RS:
- 194-2954
- Référence fabricant:
- MLX92213ELD-AAA-000-RE
- Fabricant:
- Melexis
Offre groupée disponible
Sous-total (1 paquet de 25 unités)*
8,80 €
(TVA exclue)
10,65 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
Temporairement en rupture de stock
- Expédition à partir du 18 mai 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | le paquet* |
|---|---|---|
| 25 - 25 | 0,352 € | 8,80 € |
| 50 - 475 | 0,304 € | 7,60 € |
| 500 - 975 | 0,297 € | 7,43 € |
| 1000 - 2475 | 0,29 € | 7,25 € |
| 2500 + | 0,282 € | 7,05 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 194-2954
- Référence fabricant:
- MLX92213ELD-AAA-000-RE
- Fabricant:
- Melexis
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Melexis | |
| Sensor Type | Hall Effect Sensors | |
| Product Type | Hall Effect Sensor | |
| Technology | CMOS | |
| Mount Type | Surface | |
| Magnetic Type | Latch | |
| Minimum Supply Voltage | 1.6V | |
| Package Type | UTQFN | |
| Maximum Supply Voltage | 3.6V | |
| Minimum Operating Temperature | -40°C | |
| Pin Count | 6 | |
| Maximum Operating Temperature | 85°C | |
| Length | 1.5mm | |
| Width | 2 mm | |
| Series | MLX92213 | |
| Height | 0.35mm | |
| Standards/Approvals | Pb Free | |
| Response Time | 1.90ms | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Melexis | ||
Sensor Type Hall Effect Sensors | ||
Product Type Hall Effect Sensor | ||
Technology CMOS | ||
Mount Type Surface | ||
Magnetic Type Latch | ||
Minimum Supply Voltage 1.6V | ||
Package Type UTQFN | ||
Maximum Supply Voltage 3.6V | ||
Minimum Operating Temperature -40°C | ||
Pin Count 6 | ||
Maximum Operating Temperature 85°C | ||
Length 1.5mm | ||
Width 2 mm | ||
Series MLX92213 | ||
Height 0.35mm | ||
Standards/Approvals Pb Free | ||
Response Time 1.90ms | ||
Automotive Standard No | ||
The MLX92213 features an ultra-sensitive Hall-effect latch operating from 1.6 V to 3.6 V. The output is a Push-Pull type so that an external pull-up resistor is not needed for proper operation, hence reducing PCB component count.
his device is primarily targeting battery-operated applications. As the famous Hall-effect omnipolar switch MLX90248, the MLX92213 employs an awake/sleep strategy to reduce its power consumption versus a standard Hall-effect latch sensor.
The magnetic flux density is periodically evaluated against predefined thresholds. If the flux density is above/below the BOP/BRP thresholds, then the output changes its state accordingly. During the sleep mode the output is latched in its previous state. The design has been optimized for applications requiring extended operating lifetime in battery-powered systems.
Liens connexes
- Melexis Surface Mount Hall Effect Sensor 6-Pin
- Melexis Surface Mount Hall Effect Sensor 23-Pin
- Melexis Surface Mount Hall Effect Sensor 3-Pin
- Melexis Through Hole Hall Effect Sensor 3-Pin
- Melexis 3-Axis Surface Mount Hall Effect Sensor SPI
- Melexis Through Hole Hall Effect Sensor
- Melexis Surface Mount Position Sensor 8-Pin
- Melexis 3-Axis Surface Mount Position Sensor, Digital PWM