Piher-Amphenol PSC-360 Series Position Sensor 5.5V, Analogue Signal, 6 mm Shaft
- N° de stock RS:
- 288-3545
- Numéro d'article Distrelec:
- 302-75-087
- Référence fabricant:
- PSC360G2-F-1A-C0007-ERA180-05K
- Fabricant:
- Piher-Amphenol
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
- N° de stock RS:
- 288-3545
- Numéro d'article Distrelec:
- 302-75-087
- Référence fabricant:
- PSC360G2-F-1A-C0007-ERA180-05K
- Fabricant:
- Piher-Amphenol
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Piher-Amphenol | |
| Product Type | Position Sensor | |
| Series | PSC-360 | |
| Output Signal Type | Analogue | |
| Shaft Diameter | 6mm | |
| Terminal Type | Wire | |
| Maximum Supply Voltage | 5.5V | |
| Minimum Operating Temperature | -40°C | |
| Overall Depth | 41mm | |
| Standards/Approvals | RoHS | |
| Overall Width | 41mm | |
| Overall Height | 51mm | |
| Maximum Operating Temperature | 125°C | |
| Mount Type | Chassis | |
| Switching Frequency | 2000Hz | |
| Sélectionner tout | ||
|---|---|---|
Marque Piher-Amphenol | ||
Product Type Position Sensor | ||
Series PSC-360 | ||
Output Signal Type Analogue | ||
Shaft Diameter 6mm | ||
Terminal Type Wire | ||
Maximum Supply Voltage 5.5V | ||
Minimum Operating Temperature -40°C | ||
Overall Depth 41mm | ||
Standards/Approvals RoHS | ||
Overall Width 41mm | ||
Overall Height 51mm | ||
Maximum Operating Temperature 125°C | ||
Mount Type Chassis | ||
Switching Frequency 2000Hz | ||
- Pays d'origine :
- ES
The high-performance rotary position sensor designed for use in harsh environments. This non-contacting sensor utilizes Hall-effect technology to provide accurate and reliable position sensing without any gears or mechanical interfaces. It features a programmable angular range between 15 and 360 degrees, allowing for flexible customization. Its adaptable nature allows for programmable transfer function and switch outputs, as well as different output protocols and redundancy levels.
True contactless operation for reliable and accurate position sensing
Sealed and flange-mounted design for easy positioning and installation
Non-contacting design with no gears or mechanical interfaces, resulting in minimal wear and tear over a long product lifetime
Highly customizable with programmable angular range and support for low and high-voltage power supply
Liens connexes
- PIHER SENSORS AND CONTROLS S.S.A PSC-360 Series Hall Effect Position Sensor End Type, 6 mm Shaft
- PIHER SENSORS AND CONTROLS S.S.A PST-360 Series Hall Effect Position Sensor Through Shaft Type, 13.85
- Piher-Amphenol PSC-360 Series Hall Effect Position Sensor 15V 6 mm Shaft
- PIHER SENSORS AND CONTROLS S.S.A MSC360 Series Hall Effect Position Sensor End Type, 5.9 mm Shaft
- Piher-Amphenol PST-360 Series Hall Effect Position Sensor 5.5V 17 mm Shaft
- PIHER SENSORS AND CONTROLS S.S.A PST-360 Series Hall Effect Position Sensor 5.5V 17 mm Shaft
- PIHER SENSORS AND CONTROLS S.S.A MTS-360 Series Hall Effect Position Sensor Through Shaft Type, 4 mm
- Variohm Group Hall Effect Sensor Screw 5 V dc 5.5V