Infineon OptiMOS Type N-Channel MOSFET, 100 A, 30 V Enhancement, 8-Pin TDSON BSC011N03LSIATMA1

Sous-total (1 paquet de 10 unités)*

9,32 €

(TVA exclue)

11,28 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
En stock
  • 14 110 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité
Prix par unité
le paquet*
10 +0,932 €9,32 €

*Prix donné à titre indicatif

Options de conditionnement :
N° de stock RS:
906-4362
Référence fabricant:
BSC011N03LSIATMA1
Fabricant:
Infineon
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

Infineon

Channel Type

Type N

Product Type

MOSFET

Maximum Continuous Drain Current Id

100A

Maximum Drain Source Voltage Vds

30V

Package Type

TDSON

Series

OptiMOS

Mount Type

Surface

Pin Count

8

Maximum Drain Source Resistance Rds

1.4mΩ

Channel Mode

Enhancement

Typical Gate Charge Qg @ Vgs

34nC

Maximum Power Dissipation Pd

96W

Minimum Operating Temperature

-55°C

Forward Voltage Vf

0.7V

Maximum Operating Temperature

150°C

Standards/Approvals

No

Height

1.1mm

Length

6.1mm

Automotive Standard

No

Statut RoHS : Exempté

Infineon OptiMOS Series MOSFET, 30V Maximum Drain Source Voltage, 100A Maximum Continuous Drain Current - BSC011N03LSIATMA1


This MOSFET is a power switching transistor designed for high-current, low-voltage applications in surface-mounted assemblies. It operates across a wide temperature span and is intended for use where efficient conduction and rapid gate control are required. The device is supplied in an eight-pin TDSON package and is intended to be mounted directly onto circuit board surfaces.

Features and Benefits:


• Very low on-resistance 1.4mΩ reduces conduction losses
• High continuous drain current 100A supports heavy loads
• Low forward voltage Vf 0.7V improves efficiency under load
• Moderate gate charge 34nC enables relatively fast switching
• Maximum drain-source voltage 30V allows low-voltage power stages
• Power dissipation 96W sustains elevated thermal stress

Applications


• Suitable for synchronous buck converters in power supplies
• Ideal for motor-drive stages requiring high current
• Used with battery-management circuits in high-discharge systems
• Can be used for DC-DC converters in telecom equipment
• Used for high-current load switching on surface-mount boards

What gate voltage limits should I observe for safe operation?


The gate-to-source rating is limited to 20V maximum, so gate drive should be kept within this range to prevent dielectric or gate-oxide stress.

How does thermal performance relate to ambient extremes?


The device is specified to operate from -55°C up to 150°C junction temperature, permitting use in environments with wide temperature variation provided adequate thermal management is applied.

What mounting and footprint considerations are required?


It is supplied in a TDSON package with eight pins for surface mounting

ensure PCB thermal vias and copper area accommodate the 96W dissipation and high current paths.

How does channel type influence circuit topology choices?


The N-channel enhancement mode requires the gate to be driven positive relative to source for conduction, making it suitable as a low-side switch or in synchronous arrangements.

Liens connexes

Soyez le/la premier·ère à être informé de nos nouveautés produits et de nos offres spéciales.

adresse e-mail

Les données personnelles que vous nous fournissez en vous inscrivant à cette liste de diffusion seront traitées conformément à notre politique de confidentialité.