Dold Temperature Monitoring Relay, DPDT, DIN Rail
- N° de stock RS:
- 500-3537
- Référence fabricant:
- MK9163N.12/110 ATEX AC50/60Hz 230V
- Fabricant:
- Dold
Visuel non contractuel
Sous-total (1 unité)*
104,47 €
(TVA exclue)
126,41 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 7 unité(s) prête(s) à être expédiée(s)
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 104,47 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 500-3537
- Référence fabricant:
- MK9163N.12/110 ATEX AC50/60Hz 230V
- Fabricant:
- Dold
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Dold | |
| Monitoring Application | Temperature | |
| Contact Configuration | DPDT | |
| Mounting Type | DIN Rail | |
| Time Delay | <40ms | |
| Temperature Sensitivity | Overtemperature | |
| Series | MK 9163N ATEX | |
| Hazardous Area Certification | ATEX | |
| Maximum Operating Temperature | +60°C | |
| Width | 22.5mm | |
| Minimum Operating Temperature | -20°C | |
| Dimensions | 102 x 22.5 x 90mm | |
| Height | 90mm | |
| Operating Temperature Range | +60°C | |
| Length | 102mm | |
| Sélectionner tout | ||
|---|---|---|
Marque Dold | ||
Monitoring Application Temperature | ||
Contact Configuration DPDT | ||
Mounting Type DIN Rail | ||
Time Delay <40ms | ||
Temperature Sensitivity Overtemperature | ||
Series MK 9163N ATEX | ||
Hazardous Area Certification ATEX | ||
Maximum Operating Temperature +60°C | ||
Width 22.5mm | ||
Minimum Operating Temperature -20°C | ||
Dimensions 102 x 22.5 x 90mm | ||
Height 90mm | ||
Operating Temperature Range +60°C | ||
Length 102mm | ||
- Pays d'origine :
- DE
MK 9163N - thermistor motor protection relay
1 input for 1 → 6 thermistors
Closed circuit current principle (output relay not activated in the event of a fault)
LED indicator for auxiliary voltage and contact position
Output contact 2 changeovers
With error memory and reset function
22.5 mm overall width
Closed circuit current principle (output relay not activated in the event of a fault)
LED indicator for auxiliary voltage and contact position
Output contact 2 changeovers
With error memory and reset function
22.5 mm overall width
Thermistor motor protection relay with and without ATEX approval
For detection of
- Temperature limit exceedance
- Wire breakage in sensor circuit
- Short circuit in sensor circuit (ATEX version)
For detection of
- Temperature limit exceedance
- Wire breakage in sensor circuit
- Short circuit in sensor circuit (ATEX version)
Standards
EN 60947-8, EN 60079-14
Group and Category
PTB 03 ATEX 3117
Certificate No.
II (2) GD
Approvals
CE
Liens connexes
- Dold Temperature Monitoring Relay with DPDT Contacts, 230 V ac
- Dold Temperature Monitoring Relay with DPDT Contacts, 24 V ac/dc
- Dold Standstill Monitoring Relay with DPDT Contacts, 230 V
- Dold Current Monitoring Relay DIN Rail
- Dold Phase Monitoring Relay DPDT, DIN Rail
- Dold Thermistor Motor Protection Monitoring Relay DIN Rail
- Dold Frequency Monitoring Relay DIN Rail
- Dold Voltage Monitoring Relay DPDT, DIN Rail