Carlo Gavazzi Monitoring Relay, 1 Phase, 1 NO/1 NC, DIN Rail, 100μA to 10A, 24 → 48 V ac, 115V
- N° de stock RS:
- 256-5058
- Référence fabricant:
- DIB01CD4810A
- Fabricant:
- Carlo Gavazzi
Sous-total (1 unité)*
154,66 €
(TVA exclue)
187,14 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- Plus 5 unité(s) expédiée(s) à partir du 17 novembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 154,66 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 256-5058
- Référence fabricant:
- DIB01CD4810A
- Fabricant:
- Carlo Gavazzi
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Carlo Gavazzi | |
| Product Type | Monitoring Relay | |
| Electrical Phase | 1 | |
| Contact Configuration | 1 NO/1 NC | |
| Mount Type | DIN Rail | |
| Minimum Current Sensed | 100μA | |
| Power Consumption | 4VA | |
| Maximum Current Sensed | 10A | |
| Terminal Type | Screw | |
| Time Delay | 0.1 → 30 s | |
| IP Rating | IP20 | |
| Supply AC Voltage | 115V | |
| Minimum Operating Temperature | -20°C | |
| Supply DC Voltage | 24 → 48 V ac | |
| Maximum Operating Temperature | 60°C | |
| Width | 80mm | |
| Height | 99.5mm | |
| Standards/Approvals | CSA, UL, CE marking | |
| Length | 22.5mm | |
| Sélectionner tout | ||
|---|---|---|
Marque Carlo Gavazzi | ||
Product Type Monitoring Relay | ||
Electrical Phase 1 | ||
Contact Configuration 1 NO/1 NC | ||
Mount Type DIN Rail | ||
Minimum Current Sensed 100μA | ||
Power Consumption 4VA | ||
Maximum Current Sensed 10A | ||
Terminal Type Screw | ||
Time Delay 0.1 → 30 s | ||
IP Rating IP20 | ||
Supply AC Voltage 115V | ||
Minimum Operating Temperature -20°C | ||
Supply DC Voltage 24 → 48 V ac | ||
Maximum Operating Temperature 60°C | ||
Width 80mm | ||
Height 99.5mm | ||
Standards/Approvals CSA, UL, CE marking | ||
Length 22.5mm | ||
- Pays d'origine :
- IT
The Carlo Gavazzi DIB01 is a precise TRMS AC/DC over or under current monitoring relays. Direct measuring or through current transformer. Owing to the built-in latch function, the ON-position of the relay output can be maintained. Inhibit function can be used to avoid relay operation when not desired. The LED's indicate the state of the alarm and the output relay. Through the built-in shunt it is possible to monitor loads up to 10 A AC/DC.
Selection of measuring range by DIP-switches
Measuring ranges from 0.1 mA to 10 A AC/DC
Adjustable current on relative scale
Adjustable hysteresis on relative scale
Adjustable delay function (0.1 to 30 s)
Liens connexes
- Carlo Gavazzi Monitoring Relay SPDT 100μA to 5A 230 V ac
- Carlo Gavazzi Monitoring Relay SPDT 24 V 48 V dc
- Carlo Gavazzi Monitoring Relay SPDT 115V ac, 230 V ac
- Carlo Gavazzi Monitoring Relay SPDT 115V ac, 230 V ac 48 V ac
- Carlo Gavazzi Monitoring Relay SPDT 48 V ac 230 V ac
- Carlo Gavazzi Monitoring Relay SPDT, DIN Rail to 10A
- Carlo Gavazzi Monitoring Relay SPDT 500mA to 5A 230 V ac
- Carlo Gavazzi Power Relay 10A Switching Current, DPDT
