Dold Monitoring Relay, 3, 1 Phase, 3PDT, DIN Rail
- N° de stock RS:
- 181-2784
- Référence fabricant:
- LH5946.48/61 0,2-4V UH=DC24V 0,2-6s
- Fabricant:
- Dold
Sous-total (1 unité)*
761,75 €
(TVA exclue)
921,72 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 4 unité(s) prête(s) à être expédiée(s)
- Plus 3 unité(s) expédiée(s) à partir du 06 mars 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 761,75 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 181-2784
- Référence fabricant:
- LH5946.48/61 0,2-4V UH=DC24V 0,2-6s
- Fabricant:
- Dold
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Dold | |
| Product Type | Monitoring Relay | |
| Electrical Phase | 3, 1 | |
| Contact Configuration | 3PDT | |
| Mount Type | DIN Rail | |
| Power Consumption | 5VA | |
| Terminal Type | Screw | |
| IP Rating | IP54 | |
| Time Delay | 0.2 to 6 s | |
| Minimum Operating Temperature | -25°C | |
| Maximum Operating Temperature | 60°C | |
| Standards/Approvals | EN 61800-5-2, IEC/EN 62061, IEC/EN 61511, IEC/EN 61508, EN ISO 13849-1 | |
| Series | LH5946 | |
| Length | 121mm | |
| Width | 45 mm | |
| Height | 90mm | |
| Sélectionner tout | ||
|---|---|---|
Marque Dold | ||
Product Type Monitoring Relay | ||
Electrical Phase 3, 1 | ||
Contact Configuration 3PDT | ||
Mount Type DIN Rail | ||
Power Consumption 5VA | ||
Terminal Type Screw | ||
IP Rating IP54 | ||
Time Delay 0.2 to 6 s | ||
Minimum Operating Temperature -25°C | ||
Maximum Operating Temperature 60°C | ||
Standards/Approvals EN 61800-5-2, IEC/EN 62061, IEC/EN 61511, IEC/EN 61508, EN ISO 13849-1 | ||
Series LH5946 | ||
Length 121mm | ||
Width 45 mm | ||
Height 90mm | ||
- Pays d'origine :
- DE
No external sensors necessary
Independent of direction
Broken wire detection
Forcibly guided safety contacts:
3 NO contacts, 1 NC contact for AC 250 V
2 semiconductor monitoring outputs
1 monitoring output (NO contact)
Adjustable voltage setting
Adjustable standstill time delay
LED indicators for standstill, event of line breakage and operation voltage
Suitable for operation with inverters
Width 45 mm
Advantages / Customer benefit
Without sensor and safe
Fast reaction time
Easy to retrofit
Combined with Interlock SAFEMASTER STS
Liens connexes
- Dold Standstill Monitoring Relay 3 Phase DIN Rail
- Dold Standstill Monitoring Relay 3 Phase Maximum of 4 V, DIN Rail
- Dold Monitoring Relay 2NO/1NC DIN Rail
- Siemens Standstill Monitoring Relay Snap-On Rail Mount
- Dold Speed Monitoring Relay DIN Rail
- Dold Standstill Monitoring Relay with DPDT Contacts, 230 V
- Dold Speed Monitoring Relay DIN Rail
- Dold Frequency Monitoring Relay DIN Rail
