Syfer Technology 100 pF, 500V dc, ±5 %, Surface Mount
- N° de stock RS:
- 170-6489
- Référence fabricant:
- 1206Y5000101JCT
- Fabricant:
- Syfer Technology
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
- N° de stock RS:
- 170-6489
- Référence fabricant:
- 1206Y5000101JCT
- Fabricant:
- Syfer Technology
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Syfer Technology | |
| Capacitance | 100pF | |
| Voltage | 500V dc | |
| Package/Case | 1206 | |
| Mount Type | Surface Mount | |
| Tolerance | ±5 % | |
| Minimum Operating Temperature | -55°C | |
| Series | Flexicap | |
| Height | 1.6mm | |
| Length | 3.2mm | |
| Maximum Operating Temperature | 125°C | |
| Sélectionner tout | ||
|---|---|---|
Marque Syfer Technology | ||
Capacitance 100pF | ||
Voltage 500V dc | ||
Package/Case 1206 | ||
Mount Type Surface Mount | ||
Tolerance ±5 % | ||
Minimum Operating Temperature -55°C | ||
Series Flexicap | ||
Height 1.6mm | ||
Length 3.2mm | ||
Maximum Operating Temperature 125°C | ||
- Pays d'origine :
- GB
Syfer Flexicap 1206
FlexiCap™ has been developed as a result of listening to customers’ experiences of stress damage to MLCCs
A proprietary flexible epoxy polymer termination material, that is applied to the device under the usual nickel barrier finish
FlexiCapT™ will accommodate a greater degree of board bending than conventional capacitors
An additional benefit of FlexiCap™ is that MLCCs can withstand temperature cycling -55ºC to 125ºC in excess of 1000 times without cracking
FlexiCap™ may be soldered using your traditional wave or reflow solder techniques and needs no adjustment to equipment or current processes
1206 Range
C0G (NP0) is the most popular formulation of the "temperature-compensating", EIA Class I ceramic materials
X7R formulations are called "temperature stable" Ceramics and fall into EIA Class II materials
Y5V formulations are for general-purpose use in a limited temperature range.These characteristics make Y5V Ideal for decoupling applications