KEMET 47 nF Multilayer Ceramic Capacitor, 16V dc, ±5 %, Surface
- N° de stock RS:
- 161-1546
- Référence fabricant:
- C0805X473J4JACAUTO
- Fabricant:
- KEMET
Sous-total (2500 unités, sur une bobine de 2500)*
375,00 €
(TVA exclue)
450,00 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 22 février 2027
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | la bobine* |
|---|---|---|
| 2500 + | 0,15 € | 375,00 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 161-1546
- Référence fabricant:
- C0805X473J4JACAUTO
- Fabricant:
- KEMET
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | KEMET | |
| Capacitance | 47nF | |
| Product Type | Multilayer Ceramic Capacitor | |
| Voltage | 16V dc | |
| Construction | Stacked | |
| Package/Case | 0805 | |
| Mount Type | Surface | |
| Packaging | Tape & Reel | |
| Dielectric | U2J | |
| Tolerance | ±5 % | |
| Automotive Standard | AEC-Q200 | |
| Termination Type | Solder | |
| Minimum Operating Temperature | -55°C | |
| Series | U2J X FT-CAP | |
| Length | 2mm | |
| Width | 1.25mm | |
| Height | 1.25mm | |
| Standards/Approvals | EIA 481, EIA 0805, EIA 556, IPC-7351, J-STD-020, EIA 1206, EIA 0603, EIA 624 | |
| Maximum Operating Temperature | 125°C | |
| Sélectionner tout | ||
|---|---|---|
Marque KEMET | ||
Capacitance 47nF | ||
Product Type Multilayer Ceramic Capacitor | ||
Voltage 16V dc | ||
Construction Stacked | ||
Package/Case 0805 | ||
Mount Type Surface | ||
Packaging Tape & Reel | ||
Dielectric U2J | ||
Tolerance ±5 % | ||
Automotive Standard AEC-Q200 | ||
Termination Type Solder | ||
Minimum Operating Temperature -55°C | ||
Series U2J X FT-CAP | ||
Length 2mm | ||
Width 1.25mm | ||
Height 1.25mm | ||
Standards/Approvals EIA 481, EIA 0805, EIA 556, IPC-7351, J-STD-020, EIA 1206, EIA 0603, EIA 624 | ||
Maximum Operating Temperature 125°C | ||
- Pays d'origine :
- MX
KEMET’s Flexible Termination (FT-CAP) Multilayer Ceramic Capacitor in U2J dielectric incorporates a unique, flexible termination system that is integrated with KEMET’s standard termination materials. A conductive silver epoxy is utilized between the base metal and nickel barrier layers of KEMET’s standard termination system in order to establish pliability while maintaining Terminal strength, solderability and electrical performance.
AEC–Q200 automotive qualified
Low dissipation factor DF < 0.1%
Low noise solution similar to C0G
Low ESR and ESL
High thermal stability
High ripple current capability
Preferred capacitance solution at line frequencies and into the MHz range
Retains over 99% of nominal capacitance at full rated voltage
Small predictable and linear capacitance change with respect to temperature
Liens connexes
- KEMET 47 nF Multilayer Ceramic Capacitor ±5 %, Surface
- KEMET 47 nF Multilayer Ceramic Capacitor ±10 %, Surface
- Murata 47 nF Multilayer Ceramic Capacitor Surface
- KEMET 100 nF Multilayer Ceramic Capacitor ±5 %, Surface
- KEMET 100 nF Multilayer Ceramic Capacitor 5 %, Surface
- KEMET 470 nF Multilayer Ceramic Capacitor ±5 %, Surface
- KEMET 47 nF Multilayer Ceramic Capacitor ±5 %, Surface
- KEMET 47 nF Multilayer Ceramic Capacitor ±5 %, Surface