PUI Audio Microphone MEMS, 20 kHz
- N° de stock RS:
- 287-732
- Référence fabricant:
- DMM-4026-B-I2S-R
- Fabricant:
- PUI Audio
Offre groupée disponible
Consulter les options de prix de grosSous-total (1 ruban de 2 unités)*
4,62 €
(TVA exclue)
5,60 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 1 210 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | le ruban* |
|---|---|---|
| 2 - 18 | 2,31 € | 4,62 € |
| 20 - 198 | 2,08 € | 4,16 € |
| 200 - 998 | 1,92 € | 3,84 € |
| 1000 - 1998 | 1,775 € | 3,55 € |
| 2000 + | 1,445 € | 2,89 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 287-732
- Référence fabricant:
- DMM-4026-B-I2S-R
- Fabricant:
- PUI Audio
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | PUI Audio | |
| Sub Type | MEMS | |
| Product Type | Microphone | |
| Directionality/Polar Pattern | Omni Directional | |
| Maximum Operating Voltage | 3.6V | |
| Sensitivity | -26dB | |
| Length | 4mm | |
| Standards/Approvals | REACH, RoHS | |
| Maximum Frequency Response | 20kHz | |
| Minimum Frequency Response | 0.02kHz | |
| Minimum Operating Voltage | 1.5V | |
| Sélectionner tout | ||
|---|---|---|
Marque PUI Audio | ||
Sub Type MEMS | ||
Product Type Microphone | ||
Directionality/Polar Pattern Omni Directional | ||
Maximum Operating Voltage 3.6V | ||
Sensitivity -26dB | ||
Length 4mm | ||
Standards/Approvals REACH, RoHS | ||
Maximum Frequency Response 20kHz | ||
Minimum Frequency Response 0.02kHz | ||
Minimum Operating Voltage 1.5V | ||
PUI Audio Microphone, 20kHz Maximum Frequency Response, -26dB Sensitivity - DMM-4026-B-I2S-R
This omnidirectional MEMS microphone is designed for low-voltage digital audio capture in industrial and electronic systems. It converts acoustic signals into an I2S output suitable for integration with digital processors and control units, offering broad frequency coverage for voice and environmental sensing in automation and machine‑interface contexts.
Features and Benefits:
• Omnidirectional pickup for uniform sound capture across angles
• Frequency response of 0.02 to 20 kHz for wideband audio detection
• Sensitivity -26 dB enabling detection of low‑level signals
• Operates from 1.5V to 3.6V for low‑voltage system compatibility
• Pin‑type connector for straightforward board‑level connection
• REACH and RoHS conformity supporting regulatory material limits
• Frequency response of 0.02 to 20 kHz for wideband audio detection
• Sensitivity -26 dB enabling detection of low‑level signals
• Operates from 1.5V to 3.6V for low‑voltage system compatibility
• Pin‑type connector for straightforward board‑level connection
• REACH and RoHS conformity supporting regulatory material limits
Applications
• Suitable for voice detection in machinery safety systems
• Ideal for acoustic monitoring in environmental control units
• Used with embedded controllers for hands‑free interfaces
• Can be used for sound‑based diagnostics in electromechanical equipment
• Ideal for acoustic monitoring in environmental control units
• Used with embedded controllers for hands‑free interfaces
• Can be used for sound‑based diagnostics in electromechanical equipment
What electrical supply range is required for reliable operation?
It accepts a supply between 1.5V and 3.6 V, allowing use with common low‑voltage logic rails and battery‑powered electronics.
How does the microphone perform across the audible spectrum?
The device responds from 0.02 kHz up to 20 kHz, covering subsonic monitoring through the full audible range for voice and machine‑noise analysis.
What connector type should I expect for PCB integration?
It employs a pin‑type connector, compatible with soldering or pin‑header mounting on PCB layouts.
Is the device suitable for applications demanding material‑restriction compliance?
The microphone meets REACH and RoHS requirements, indicating it conforms to the specified substance restrictions.
Liens connexes
- PUI Audio Microphone MEMS, 18 kHz
- PUI Audio Microphone MEMS, 20 kHz
- PUI Audio Microphone MEMS
- PUI Audio Omni-Directional, Surface Mount Microphone -26dB
- PUI Audio Microphone ECM, 16 kHz
- PUI Audio Omni-Directional, Surface Mount Digital Microphone -26dBFS
- PUI Audio Microphone ECM, 10 kHz
- PUI Audio Microphone ECM, 20 kHz