Références fabricant

Honeywell Pin Plunger Micro Switch, Screw Terminal, 15A, 480 V ac, 250 V, SPDT, IP64

N° de stock RS:: 636-353
Référence fabricant:: BZ-RX122
Fabricant:: Honeywell

Honeywell Pin Plunger Micro Switch, Screw Terminal, 15A, 480 V ac, 250 V, SPDT, IP64

Sous-total (1 unité)*

80,54 €

(TVA exclue)

97,45 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

En stock

96 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité
1 +	80,54 €

*Prix donné à titre indicatif

N° de stock RS:: 636-353
Référence fabricant:: BZ-RX122
Fabricant:: Honeywell

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Honeywell
	Actuator Type	Pin Plunger
	Product Type	Micro Switch
	Terminal Type	Screw
	Contact Configuration	SPDT
	Housing Material	General Purpose Phenolic
	IP Rating	IP64
	Operating Force	6.12N
	Minimum Operating Temperature	-55°C
	Maximum Operating Temperature	204°C
	Contact DC Voltage	250V
	Microswitch Type	Standard
	Contact AC Voltage	480V ac
	Mechanical Life	20000000Cycles
	Depth	24.1mm
	Length	49.3mm
	Series	BZ
	Width	17.5mm
	Hazardous Area Certification	NO
	Standards/Approvals	MIL-PRF-8805, ENEC, CE, CSA, UKCA, UL

	Sélectionner tout
	Marque Honeywell
	Actuator Type Pin Plunger
	Product Type Micro Switch
	Terminal Type Screw
	Contact Configuration SPDT
	Housing Material General Purpose Phenolic
	IP Rating IP64
	Operating Force 6.12N
	Minimum Operating Temperature -55°C
	Maximum Operating Temperature 204°C
	Contact DC Voltage 250V
	Microswitch Type Standard
	Contact AC Voltage 480V ac
	Mechanical Life 20000000Cycles
	Depth 24.1mm
	Length 49.3mm
	Series BZ
	Width 17.5mm
	Hazardous Area Certification NO
	Standards/Approvals MIL-PRF-8805, ENEC, CE, CSA, UKCA, UL

Pays d'origine :: MX

Honeywell Micro Switch, 15A Switch Contact Current, IP64 - BZ-RX122

This micro-switch is a Compact electromechanical device designed to provide reliable change-over switching in industrial control and automation equipment. It features a pin plunger actuator and is built for environments where a combination of electrical performance and enclosure protection is required, making it suitable for demanding electrical, electronic and mechanical applications.

Features and Benefits:

• SPDT contact arrangement gives flexible circuit switching capability
• Rated for 15A contact current supports high-load switching
• AC and DC voltage ratings cover 480V and 250V operation respectively
• IP64 protection resists dust ingress and splashing water
• Mechanical life of 20 million cycles reduces maintenance frequency
• Operating force of 6.12N enables consistent actuation effort

Applications

• Suitable for industrial control panels requiring change-over contacts
• Ideal for safety interlocks in machinery where tactile actuation is used
• Used with conveyor systems for end-of-travel detection
• Can be used for equipment that must operate across wide temperature ranges

What Terminal type does it use and how does that affect installation?

It uses screw terminals, allowing secure conductor connection and straightforward replacement in control cabinets.

Which material composes the housing and what is the benefit?

The housing is a general-purpose phenolic compound, offering electrical insulation and dimensional stability under load.

What operating temperatures can it withstand?

It operates down to -55°C and up to 204°C, enabling use in both low-temperature and high-temperature locations.

Which certifications cover its acceptance in regulated systems?

It complies with multiple standards including MIL-PRF-8805, ENEC, CE, CSA, UKCA and UL for deployment in certified installations.