Megger RCDT320-EN-BS RCD Tester, Loop Impedance Test Type 2 Wire 300V, RCD Test Type DC, RCD Test Current 1000 mA CAT
- N° de stock RS:
- 711-9019
- Référence fabricant:
- RCDT320-EN-BS
- Fabricant:
- Megger
Sous-total (1 unité)*
879,00 €
(TVA exclue)
1 063,59 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- Plus 9 unité(s) expédiée(s) à partir du 23 mars 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 879,00 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 711-9019
- Référence fabricant:
- RCDT320-EN-BS
- Fabricant:
- Megger
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Megger | |
| Product Type | RCD Tester | |
| Test Equipment Type | RCD Tester | |
| Loop Impedance Test Type | 2 Wire | |
| Maximum Voltage Measurement | 300V | |
| RCD Test Type | DC | |
| RCD Test Current | 1000mA | |
| Display Type | LCD | |
| Battery Type | AA | |
| Minimum Operating Temperature | -5°C | |
| Power Source | Battery | |
| Maximum Operating Temperature | 40°C | |
| Width | 148 mm | |
| Weight | 980g | |
| Standards/Approvals | IEC 61326-1 | |
| Length | 203mm | |
| Height | 78mm | |
| Safety Category Voltage | 300V | |
| Safety Category Level | CAT III | |
| Calibrated | RSCAL | |
| Plug Type | 3-Pin (Global) | |
| Sélectionner tout | ||
|---|---|---|
Marque Megger | ||
Product Type RCD Tester | ||
Test Equipment Type RCD Tester | ||
Loop Impedance Test Type 2 Wire | ||
Maximum Voltage Measurement 300V | ||
RCD Test Type DC | ||
RCD Test Current 1000mA | ||
Display Type LCD | ||
Battery Type AA | ||
Minimum Operating Temperature -5°C | ||
Power Source Battery | ||
Maximum Operating Temperature 40°C | ||
Width 148 mm | ||
Weight 980g | ||
Standards/Approvals IEC 61326-1 | ||
Length 203mm | ||
Height 78mm | ||
Safety Category Voltage 300V | ||
Safety Category Level CAT III | ||
Calibrated RSCAL | ||
Plug Type 3-Pin (Global) | ||
Statut RoHS non applicable
- Pays d'origine :
- GB
Megger RCD Tester, 25 to 450Hz Frequency Measurement Range, Backlit Display - RCDT300 Series - RCDT320-EN-BS
Probe your electrical safety system to make sure it's in good working condition with this RCD tester from Megger. It simulates an earth leakage to check how your device responds and if it trips the circuit. The built-in ramp testing feature lets you pinpoint the trip current of your RCD, so you can tell when nuisance tripping is happening with the wrong current flow. You can also use this handy piece of kit to measure frequencies between 25 and 450Hz.
Features & Benefits
• Display is backlit for easy viewing in low-light conditions
• Auto power-down function helps to conserve battery life
Applications
• Server rooms
• Repair workshops
• Aerospace engineering
• Automotive wiring
How accurate is this tester?
It has a voltage accuracy of ±2% and a frequency accuracy of ±0.1Hz for measurements between 25 and 199.9Hz. An accuracy of ±1Hz when measuring frequencies of 200 to 450Hz means you can be sure of all-round precise measurements.
What's the polarity selection range of this tester?
You can set the polarity check of this tester to 0 or 180° to test how safe your live and neutral wires are.
Liens connexes
- Megger RCDT320-EN-BS RCD Tester RCD Test Type DC, RCD Test Current 1000 mA CAT
- Megger RCDT320-FR RCD Tester RCD Test Type DC, RCD Test Current 1000 mA CAT
- Megger RCDT310-EN-BS RCD Tester RCD Test Type DC Selective RCD
- Megger LTW425-EU-BS Loop Impendence & RCD Combined Tester RCD Test Type AC, RCD
- Megger LTW325-EU-BS Loop Impendence & RCD Combined Tester RCD Test Type AC, RCD
- Megger LTW315-EU-BS Loop Impendence Tester 3 Wire 440V RCD Test
- Megger LRCD220-EN-BS Loop Impendence & RCD Combined Tester RCD Test Type AC
- Megger LT300-EN-BS Loop Impendence Tester, Loop Impedance Test Type 2 Wire 550V CAT IV