Megger LRCD220-FR Loop Impendence & RCD Combined Tester, Loop Impedance Test Type 2 Wire 500V, RCD Test Type AC, DC, RCD
- N° de stock RS:
- 537-7923
- Référence fabricant:
- LRCD220-FR
- Fabricant:
- Megger
Sous-total (1 unité)*
1 170,00 €
(TVA exclue)
1 415,70 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Dernier stock RS
- 1 dernière(s) unité(s), prête(s) à l'envoi d'un autre centre de distribution
Unité | Prix par unité |
|---|---|
| 1 + | 1 170,00 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 537-7923
- Référence fabricant:
- LRCD220-FR
- Fabricant:
- Megger
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Megger | |
| Product Type | Loop Impendence & RCD Combined Tester | |
| Loop Impedance Test Type | 2 Wire | |
| Test Equipment Type | Combined Loop and RCD Tester | |
| Maximum Voltage Measurement | 500V | |
| RCD Test Type | AC, DC | |
| PSC Display | Yes | |
| RCD Test Current | 1000mA | |
| Non-Trip Loop Test | Yes | |
| Display Type | LCD | |
| Battery Type | AA | |
| Loop Test Accuracy | ±2 % | |
| Minimum Operating Temperature | -5°C | |
| Power Source | Battery | |
| Maximum Operating Temperature | 40°C | |
| Length | 203mm | |
| Standards/Approvals | IEC 61326-1 | |
| Width | 148mm | |
| Weight | 980g | |
| Height | 203mm | |
| Safety Category Voltage | 300V | |
| Safety Category Level | CAT III | |
| Sélectionner tout | ||
|---|---|---|
Marque Megger | ||
Product Type Loop Impendence & RCD Combined Tester | ||
Loop Impedance Test Type 2 Wire | ||
Test Equipment Type Combined Loop and RCD Tester | ||
Maximum Voltage Measurement 500V | ||
RCD Test Type AC, DC | ||
PSC Display Yes | ||
RCD Test Current 1000mA | ||
Non-Trip Loop Test Yes | ||
Display Type LCD | ||
Battery Type AA | ||
Loop Test Accuracy ±2 % | ||
Minimum Operating Temperature -5°C | ||
Power Source Battery | ||
Maximum Operating Temperature 40°C | ||
Length 203mm | ||
Standards/Approvals IEC 61326-1 | ||
Width 148mm | ||
Weight 980g | ||
Height 203mm | ||
Safety Category Voltage 300V | ||
Safety Category Level CAT III | ||
Statut RoHS : Exempté
- Pays d'origine :
- GB
Megger Loop Impedance and RCD Combined Tester, 10mA to 1000mA RCD Test Current Range, Armoured Rubber Case - LRCD200 Series - LRCD220-FR
Make sure your electrical safety systems are in top-notch condition with this loop impedance and RCD combined tester from Megger. Its no-trip feature means you can check all devices over 30mA without accidental activation. The handy instrument can also read the trip time of your RCD to ensure it reacts quickly to fault currents, with an auto-test function letting you focus on the breaker during the process. For additional peace of mind, you can perform 2-wire fast testing, phase-to-phase and phase-to-earth measurements on this versatile device.
Features & Benefits
• RCD test current range of 10mA to 1000mA gives you a broad scope
• IP54 rating demonstrates protection against water sprays for a weatherproof unit
• Integrated voltmeter lets you read voltage levels
• Backlit display for convenient viewing in low-light settings
Applications
• Electrical engineering
• Security systems
• Control panels
• Lighting fixtures
How does earth loop impedance testing work?
Testers like this one measure the impedance of the electrical loop by releasing a test current to the circuit. This tells you if the system can deliver enough current to activate the fuse in case of electrical faults and disconnect quickly enough to prevent a fire outbreak.
Liens connexes
- Megger LRCD220-EN-BS Loop Impendence & RCD Combined Tester RCD Test Type AC
- Megger LTW425-EU-BS Loop Impendence & RCD Combined Tester RCD Test Type AC, RCD
- Megger LTW325-EU-BS Loop Impendence & RCD Combined Tester RCD Test Type AC, RCD
- Megger LTW315-EU-BS Loop Impendence Tester 3 Wire 440V RCD Test
- Gossen Metrawatt M507B Loop Impendence Tester RCD Test Type AC Selective, RCD
- Megger LT300-EN-BS Loop Impendence Tester, Loop Impedance Test Type 2 Wire 550V CAT IV
- Megger LT300-EN-BS Loop Impendence Tester RSCAL
- Megger LT300-EN-BS Loop Impendence Tester UKAS