Igus Linear Guide Carriage NW-02-40 DryLin N Series, 400 N Dynamic Load
- N° de stock RS:
- 448-5411
- Référence fabricant:
- NW-02-40
- Fabricant:
- Igus
Offre groupée disponible
Consulter les options de prix de grosSous-total (1 unité)*
12,56 €
(TVA exclue)
15,20 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 54 unité(s) prête(s) à être expédiée(s)
- Plus 510 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 4 | 12,56 € |
| 5 - 9 | 12,07 € |
| 10 + | 11,82 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 448-5411
- Référence fabricant:
- NW-02-40
- Fabricant:
- Igus
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Igus | |
| Product Type | Linear Guide Carriage | |
| Series | DryLin N | |
| Carriage Length | 50mm | |
| Carriage Width | 23mm | |
| Dynamic Load Rating | 400N | |
| Static Load Rating | 700N | |
| Acceptable Rail Width | 80mm | |
| Carriage Type | Slider | |
| Standards/Approvals | DIN 7984, DIN 84, EN ISO 1707, DIN 6912 | |
| Sélectionner tout | ||
|---|---|---|
Marque Igus | ||
Product Type Linear Guide Carriage | ||
Series DryLin N | ||
Carriage Length 50mm | ||
Carriage Width 23mm | ||
Dynamic Load Rating 400N | ||
Static Load Rating 700N | ||
Acceptable Rail Width 80mm | ||
Carriage Type Slider | ||
Standards/Approvals DIN 7984, DIN 84, EN ISO 1707, DIN 6912 | ||
Statut RoHS : Exempté
- Pays d'origine :
- DE
Igus DryLin R Series Bearing, 16mm Inside Diameter, 26mm Outside Diameter - RJUM-01-16
This bearing is a closed-end linear bearing intended for guiding shafts in automation and mechanical assemblies. It combines a compact aluminium body with a design suited to linear motion applications where a sealed end and defined centreline offset are required. The component is designed for industry use where solid radial support and integration into linear systems are needed.
Features and Benefits:
• 10080N static capacity provides sustained support under high preload
• 1440N dynamic rating enables continuous motion loads
• 13mm base-to-bore centreline ensures consistent alignment
• Aluminium construction reduces mass for moving assemblies
• Closed-end design prevents shaft overtravel and ingress
• 36mm overall length allows compact carriage integration
• 1440N dynamic rating enables continuous motion loads
• 13mm base-to-bore centreline ensures consistent alignment
• Aluminium construction reduces mass for moving assemblies
• Closed-end design prevents shaft overtravel and ingress
• 36mm overall length allows compact carriage integration
Applications
• Suitable for linear guideways in pick-and-place units
• Ideal for actuator shafts in control panels and enclosures
• Used for supporting guide rods in conveyor modules
• Can be used for motion stages in test rigs
• Used with sliding elements in compact automation cells
• Ideal for actuator shafts in control panels and enclosures
• Used for supporting guide rods in conveyor modules
• Can be used for motion stages in test rigs
• Used with sliding elements in compact automation cells
What shaft size does it accept?
It accepts shafts with a 16mm internal bore to ensure a snug rotational fit.
How does the outside dimension affect mounting?
The 26mm external diameter determines bore size for housings and press-fit tolerances.
Is the end configuration suitable for particulate environments?
The closed-end configuration limits entry of debris from one end, reducing contamination risk at the shaft terminus.
What material properties influence thermal behaviour?
The aluminium body offers good thermal conductivity and low mass, affecting heat transfer and inertia in moving systems.
Liens connexes
- Igus Linear Guide Carriage NW-02-80 DryLin Series, 600 N Dynamic Load
- Igus Linear Guide Carriage NW-02-17 DryLin N Series, 25 N Dynamic Load
- Igus Linear Guide Carriage NW-02-27 DryLin N Series, 300 N Dynamic Load
- Igus Linear Guide Carriage WJRM-01-10 DryLin W Series, 250 N Dynamic Load
- Igus Linear Guide Carriage TW-01-15 drylin T Series
- Igus Linear Guide Carriage TW-01-20 drylin T Series
- Igus Linear Guide Carriage TW-04-12 drylin T Series
- Igus Linear Guide Carriage TW-01-25 drylin T Series