Honeywell NGC Series Plunger Limit Switch, 2 NC/2 NO, IP67, Plastic Housing, 400V ac, 10A

N° de stock RS:: 894-3396
Numéro d'article Distrelec:: 301-53-049
Référence fabricant:: NGCPA50AX32B
Fabricant:: Honeywell

Honeywell NGC Series Plunger Limit Switch, 2 NC/2 NO, IP67, Plastic Housing, 400V ac, 10A

Sous-total (1 unité)*

122,40 €

(TVA exclue)

148,10 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

En stock

2 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité
1 +	122,40 €

*Prix donné à titre indicatif

N° de stock RS:: 894-3396
Numéro d'article Distrelec:: 301-53-049
Référence fabricant:: NGCPA50AX32B
Fabricant:: Honeywell

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Honeywell
	Actuator Type	Plunger
	Product Type	Limit Switch
	IP Rating	IP67
	Contact Configuration	2 NC/2 NO
	Housing Material	Plastic
	Contact Type	Positive Break
	Switching Current	10A
	Terminal Type	Cable
	Series	NGC
	Switching AC Voltage	400V ac
	Minimum Operating Temperature	-25°C
	Maximum Operating Temperature	+75°C
	Length	30mm
	Width	16.7mm
	Standards/Approvals	cUL, CCC, CE, IEC, RoHS, UL
	Depth	60.6mm
	Hazardous Area Certification	No
	Operating Force	9.5N
	Mounting Orientation	Panel
	Mechanical Life	5000000Cycles

	Sélectionner tout
	Marque Honeywell
	Actuator Type Plunger
	Product Type Limit Switch
	IP Rating IP67
	Contact Configuration 2 NC/2 NO
	Housing Material Plastic
	Contact Type Positive Break
	Switching Current 10A
	Terminal Type Cable
	Series NGC
	Switching AC Voltage 400V ac
	Minimum Operating Temperature -25°C
	Maximum Operating Temperature +75°C
	Length 30mm
	Width 16.7mm
	Standards/Approvals cUL, CCC, CE, IEC, RoHS, UL
	Depth 60.6mm
	Hazardous Area Certification No
	Operating Force 9.5N
	Mounting Orientation Panel
	Mechanical Life 5000000Cycles

Pays d'origine :: CN

Honeywell NGC Series Limit Switch, 9.5N Operating Force, IP67 - NGCPA50AX32B

This limit switch is a plunger-operated device designed to register and break control circuits in industrial settings. It is built for panel mounting and suited to automation tasks where a positive open action is required. The unit operates across a broad temperature range and is housed in a plastic enclosure rated for protection in harsh environments.

Features and Benefits:

• Positive break contact provides fail-safe circuit opening under load
• Rated switching capacity supports 10A at 400V for mains applications
• Cable termination simplifies connection in confined control cabinets
• Mechanical endurance of 5 million cycles minimises replacement frequency
• Panel-mounting form factor enables secure, repeatable installation
• Operating force of 9.5 N gives consistent actuation response

Applications

• Suitable for conveyor end-of-travel detection in manufacturing lines
• Ideal for position sensing on industrial actuators and valves
• Used for limit detection in packaging and material handling systems
• Can be used for safety interlocks on access panels and guards

What environmental protection does it offer for outdoor or wet areas?

The enclosure meets IP67 ingress protection which prevents dust ingress and allows temporary immersion in water.

How does temperature affect operation in cold installations?

The switch is rated to function between −70°C and 25°C, enabling use in low-temperature environments without loss of specified actuation force.

What approvals support its use in regulated installations?

The unit carries approvals including cUL, CCC, CE, IEC, RoHS and UL for compatibility with multiple standards and markets.

How is electrical connection provided for integration into control wiring?

Electrical connection is via a pre-attached cable termination designed for direct wiring into control harnesses.