Honeywell Technologies DTF2 Series Plunger Limit Switch, 2 NO/2 NC, Die Cast Aluminium Housing, 250V
- N° de stock RS:
- 808-7594
- Référence fabricant:
- DTF2-2RN-LH
- Fabricant:
- Honeywell
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
- N° de stock RS:
- 808-7594
- Référence fabricant:
- DTF2-2RN-LH
- Fabricant:
- Honeywell
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Honeywell | |
| Product Type | Limit Switch | |
| Actuator Type | Plunger | |
| Contact Configuration | 2 NO/2 NC | |
| Housing Material | Die Cast Aluminium | |
| Contact Type | Snap Action | |
| Terminal Type | Screw | |
| Series | DTF2 | |
| Switching AC Voltage | 250V | |
| Minimum Operating Temperature | -32°C | |
| Maximum Operating Temperature | 71°C | |
| Standards/Approvals | UL, CSA, RoHS | |
| Width | 33.02mm | |
| Depth | 54.86mm | |
| Length | 101.6mm | |
| Hazardous Area Certification | No | |
| Operating Force | 11.2N | |
| Mounting Orientation | Vertical | |
| Conduit Entry | 12.7 mm | |
| Sélectionner tout | ||
|---|---|---|
Marque Honeywell | ||
Product Type Limit Switch | ||
Actuator Type Plunger | ||
Contact Configuration 2 NO/2 NC | ||
Housing Material Die Cast Aluminium | ||
Contact Type Snap Action | ||
Terminal Type Screw | ||
Series DTF2 | ||
Switching AC Voltage 250V | ||
Minimum Operating Temperature -32°C | ||
Maximum Operating Temperature 71°C | ||
Standards/Approvals UL, CSA, RoHS | ||
Width 33.02mm | ||
Depth 54.86mm | ||
Length 101.6mm | ||
Hazardous Area Certification No | ||
Operating Force 11.2N | ||
Mounting Orientation Vertical | ||
Conduit Entry 12.7 mm | ||
DTF2 Medium Duty Limit Switches
The DTF2 limit switch series from Honeywell is designed for use within a medium duty environment. The elastomer boot on sealed actuator verions protects the actuating mechanism and the internal basic switch from contaminants. There is a seal gasket between the cover plate and the enclosures on all versions. The cover plate is removed for ease of wiring and switch replacement without demounting the switch. The actuator position is designated "right" or "left," when looking at the nameplate.
Cast aluminium housing
Approvals
UL, CSA.
Liens connexes
- Honeywell Technologies BAF Series Top Plunger Limit Switch Die Cast Aluminium Housing 20A
- Honeywell Technologies BZE6 Series Pin Plunger Limit Switch IP66 600V
- Honeywell Technologies E7 Series Pin Plunger Limit Switch IP65 240V ac, 10A
- Honeywell Technologies BAF Series Plunger Limit Switch IP3 Zinc Die Cast Housing 20A
- Honeywell Technologies DTE6 Series Plunger Limit Switch IP66 250V ac, 10A
- Honeywell Technologies BAF/DTF Series Roller Plunger Limit Switch IP3 480V ac, 20A
- Honeywell Technologies Plunger Limit Switch IP66 IP68, Die Cast Zinc Housing
- Honeywell Technologies Top Plunger Limit Switch IP66, Die Cast Zinc Epoxy Coated Housing