Honeywell Technologies SSCE Series Plunger Limit Switch, SPDT, IP68, Die Cast Zinc Housing, 600V ac, 6A

N° de stock RS:: 344-3595
Numéro d'article Distrelec:: 136-30-225
Référence fabricant:: SSCEB31C
Fabricant:: Honeywell Technologies

Honeywell Technologies SSCE Series Plunger Limit Switch, SPDT, IP68, Die Cast Zinc Housing, 600V ac, 6A

Sous-total (1 unité)*

244,51 €

(TVA exclue)

295,86 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

En stock

Plus 56 unité(s) expédiée(s) à partir du 09 novembre 2026

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité
1 +	244,51 €

*Prix donné à titre indicatif

N° de stock RS:: 344-3595
Numéro d'article Distrelec:: 136-30-225
Référence fabricant:: SSCEB31C
Fabricant:: Honeywell Technologies

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Honeywell Technologies
	Actuator Type	Plunger
	Product Type	Limit Switch
	Contact Configuration	SPDT
	IP Rating	IP68
	Housing Material	Die Cast Zinc
	Contact Type	Snap Action
	Switching Current	6A
	Terminal Type	Cable
	Series	SSCE
	Switching DC Voltage	250V dc
	Switching AC Voltage	600V ac
	Minimum Operating Temperature	-40°C
	Maximum Operating Temperature	90°C
	Standards/Approvals	CE Certified, EN 60947-5-1, IEC 60947-5-1
	Width	40mm
	Length	67mm
	Depth	16mm
	Hazardous Area Certification	No
	Operating Force	22.5N
	Mechanical Life	10000000Cycles
	Conduit Entry	M12

	Sélectionner tout
	Marque Honeywell Technologies
	Actuator Type Plunger
	Product Type Limit Switch
	Contact Configuration SPDT
	IP Rating IP68
	Housing Material Die Cast Zinc
	Contact Type Snap Action
	Switching Current 6A
	Terminal Type Cable
	Series SSCE
	Switching DC Voltage 250V dc
	Switching AC Voltage 600V ac
	Minimum Operating Temperature -40°C
	Maximum Operating Temperature 90°C
	Standards/Approvals CE Certified, EN 60947-5-1, IEC 60947-5-1
	Width 40mm
	Length 67mm
	Depth 16mm
	Hazardous Area Certification No
	Operating Force 22.5N
	Mechanical Life 10000000Cycles
	Conduit Entry M12

Se connecter pour voir les modèles CAO

Pays d'origine :: GB

Honeywell SSCE Series Limit Switch, IP68, 6A Switching Current - SSCEB31C

This limit switch is a Compact mechanical device designed to detect linear motion and provide a snap-action electrical output for control circuits in industrial systems. Housed in die-cast zinc with IP68 ingress protection, it is intended for use where robust environmental sealing and straightforward actuator operation are required. The switch employs a plunger actuator and provides a changeover contact arrangement suitable for integration into automation, electrical control and mechanical interlock applications.

Features and Benefits:

• SPDT contact gives selectable normally open or closed switching for control flexibility
• Snap-action contact behaviour supports fast, definitive state changes under load
• Rated for 6 A switching current to handle moderate control and load circuits
• Accepts up to 600V AC for compatibility with higher-voltage installations
• Operating range from -40°C to 90°C permits use in varied thermal conditions
• Mechanical endurance of 10,000,000 cycles reduces maintenance intervention

Applications

• Suitable for position sensing on industrial conveyors and actuators
• Ideal for limit detection on packaging and material-handling equipment
• Used for safety interlocks on access panels and guards
• Can be used for end-of-travel signalling in pneumatic cylinder systems
• Suitable for control feedback in motorised valve and gearbox assemblies

What type of cable entry does this switch accept?

It uses an M12 conduit entry, enabling a sealed connection to standard M12 cable glands and conduits for protected wiring.

How does the enclosure material affect installation?

The die-cast zinc housing provides mechanical robustness and dimensional stability for mounting in harsher environments while aiding electromagnetic screening.

What standards does the switch conform to for industrial electrical switching?

It meets EN 60947-5-1 and IEC 60947-5-1 requirements and carries CE certification for applicable directives.

How is the switching action achieved mechanically?

A plunger actuator mechanically drives an internal snap-action mechanism to create Rapid contact transfer and reliable signalling under dynamic conditions.

What Terminal arrangement is provided for wiring?

The device is supplied with cable termination rather than screw terminals, permitting direct connection of pre-assembled cables.

Approvals

UL, CSA.