Honeywell GLD Series Coil Spring Limit Switch, 1 NO/1 NC, IP66, Fibreglass Reinforced Thermoplastic Housing, 240V ac, 6A

N° de stock RS:: 308-1894
Numéro d'article Distrelec:: 301-38-755
Référence fabricant:: GLDB01E7B
Fabricant:: Honeywell

Honeywell GLD Series Coil Spring Limit Switch, 1 NO/1 NC, IP66, Fibreglass Reinforced Thermoplastic Housing, 240V ac, 6A

Sous-total (1 unité)*

158,00 €

(TVA exclue)

191,18 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

En stock

75 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Plus 100 unité(s) expédiée(s) à partir du 05 octobre 2026
Plus 120 unité(s) expédiée(s) à partir du 30 novembre 2026

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité
1 +	158,00 €

*Prix donné à titre indicatif

N° de stock RS:: 308-1894
Numéro d'article Distrelec:: 301-38-755
Référence fabricant:: GLDB01E7B
Fabricant:: Honeywell

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Honeywell
	Product Type	Limit Switch
	Actuator Type	Coil Spring
	IP Rating	IP66
	Contact Configuration	1 NO/1 NC
	Housing Material	Fibreglass Reinforced Thermoplastic
	Contact Type	Snap Action
	Switching Current	6A
	Series	GLD
	Switching DC Voltage	250V dc
	Switching AC Voltage	240V ac
	Minimum Operating Temperature	-40°C
	Maximum Operating Temperature	85°C
	Width	30.5mm
	Length	68.5mm
	Depth	26.35mm
	Standards/Approvals	UL, CSA, CE, CCC
	Hazardous Area Certification	No
	Mechanical Life	10000000Cycles
	Conduit Entry	PG13.5
	Operating Force	1.3N

	Sélectionner tout
	Marque Honeywell
	Product Type Limit Switch
	Actuator Type Coil Spring
	IP Rating IP66
	Contact Configuration 1 NO/1 NC
	Housing Material Fibreglass Reinforced Thermoplastic
	Contact Type Snap Action
	Switching Current 6A
	Series GLD
	Switching DC Voltage 250V dc
	Switching AC Voltage 240V ac
	Minimum Operating Temperature -40°C
	Maximum Operating Temperature 85°C
	Width 30.5mm
	Length 68.5mm
	Depth 26.35mm
	Standards/Approvals UL, CSA, CE, CCC
	Hazardous Area Certification No
	Mechanical Life 10000000Cycles
	Conduit Entry PG13.5
	Operating Force 1.3N

Se connecter pour voir les modèles CAO

Honeywell GLD Series Limit Switch, IP66, 1.3N Operating Force - GLDB01E7B

This limit switch is a Compact industrial device designed to detect mechanical movement and provide snap-action electrical switching in control systems. It is intended for use where robust environmental protection and clear changeover signalling are required, offering a small footprint and Coil spring actuation suitable for automated equipment and machinery.

Features and Benefits:

• IP66 enclosure provides dust-tight and powerful water protection
• Fibreglass reinforced thermoplastic housing increases environmental resistance
• 1 NO/1 NC snap action contact offers decisive switching changeover
• Mechanical life of10000000cycles supports extended service intervals
• Operating force of1.3N yields precise actuation with low input effort
• Switching capacity of240V AC at6A handles common control loads

Applications

• Suitable for position sensing on conveyor systems
• Ideal for end-of-travel detection on pneumatic actuators
• Used for limit detection in packaging machinery
• Can be used for safety interlocks in panel-mounted installations
• Used with control relays in motor starter circuits

What temperature range can it operate within?

It functions across a span from-40°C up to85°C, allowing use in cold storage and warm production environments.

How is conduit access provided for wiring?

A PG13.5 conduit entry accepts standard threaded cable glands for secure cable routing.

What certifications support its use in industrial installations?

It carries approvals to UL, CSA, CE and CCC standards for international industrial compliance.

How does the contact mechanism behave electrically?

The snap-action contacts provide Rapid transition between circuits to minimise arcing and contact wear.

Approvals

UL/ UL listed for Canada

Warning

GLC and GLD limit switches are not safety devices. They should be not used as emergency stop or safety devices. They must not be used in applications where personal injury could occur as a result of product failure.

Standards

IEC/EN 60947-5-1
While IEC/EN 609747-1 covers general rules relating to low voltage switchgear and controlgear, IEC/EN 60947-5-1 specifically relates to control circuit devices and switching elements. The standard monitors the characteristics of devices, the electrical and mechanical requirements and the functional requirements.

EN50047
GLC and GLD limit switches are constructed from housing that meets EN50047. EN50047 applies to position switches with an automatic return actuator. Models that meet EN50047 feature standardised characteristics and dimensions (30.5 x 31.1 x 68 mm).

IP 66
A rating of IP 66 ensures that the limit switch units are protected against dust and low-pressure jets of water.

Sealed to NEMA 1, 4, 12, 13
NEMA 1 states that enclosures can be used indoor and offers a degree of protection against contact with the equipment enclosed.
NEMA 4 states that enclosures can be used either indoor or outdoor and provide protection against windblown rain and dust, hose directed water and splashing water.
NEMA 12 states that enclosures are intended for use indoors and offer some protection from dust, dirt, falling dirt and dripping non-corrosive liquids.
NEMA 13 states that enclosures are used indoors and offer a level of protection from oil, non-corrosive coolants, spraying water and dust.