Honeywell Technologies GLC Series Adjustable Roller Lever Limit Switch, 1 NC/1 NO, IP66, Die Cast Zinc Housing, 240V ac,

N° de stock RS:: 308-1664
Numéro d'article Distrelec:: 301-38-734
Référence fabricant:: GLCB01A2A
Fabricant:: Honeywell

Honeywell Technologies GLC Series Adjustable Roller Lever Limit Switch, 1 NC/1 NO, IP66, Die Cast Zinc Housing, 240V ac,

Sous-total (1 unité)*

115,26 €

(TVA exclue)

139,46 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

En stock

3 unité(s) prête(s) à être expédiée(s)
Plus 225 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité
1 +	115,26 €

*Prix donné à titre indicatif

N° de stock RS:: 308-1664
Numéro d'article Distrelec:: 301-38-734
Référence fabricant:: GLCB01A2A
Fabricant:: Honeywell

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Honeywell
	Product Type	Limit Switch
	Actuator Type	Adjustable Roller Lever
	Contact Configuration	1 NC/1 NO
	IP Rating	IP66
	Housing Material	Die Cast Zinc
	Contact Type	Snap Action
	Switching Current	6A
	Series	GLC
	Switching DC Voltage	250V dc
	Minimum Operating Temperature	-40°C
	Switching AC Voltage	240V ac
	Maximum Operating Temperature	85°C
	Depth	26.35mm
	Standards/Approvals	CCC, CE, CSA, UL
	Width	30.5mm
	Length	68.5mm
	Hazardous Area Certification	No
	Mechanical Life	10000000Cycles
	Operating Force	0.12Nm
	Conduit Entry	PG13.5

	Sélectionner tout
	Marque Honeywell
	Product Type Limit Switch
	Actuator Type Adjustable Roller Lever
	Contact Configuration 1 NC/1 NO
	IP Rating IP66
	Housing Material Die Cast Zinc
	Contact Type Snap Action
	Switching Current 6A
	Series GLC
	Switching DC Voltage 250V dc
	Minimum Operating Temperature -40°C
	Switching AC Voltage 240V ac
	Maximum Operating Temperature 85°C
	Depth 26.35mm
	Standards/Approvals CCC, CE, CSA, UL
	Width 30.5mm
	Length 68.5mm
	Hazardous Area Certification No
	Mechanical Life 10000000Cycles
	Operating Force 0.12Nm
	Conduit Entry PG13.5

Se connecter pour voir les modèles CAO

Pays d'origine :: GB

Honeywell GLC Series Limit Switch, IP66, 6A Switching Current - GLCB01A2A

This limit switch is a Compact electromechanical device designed to detect position changes and actuate electrical circuits in industrial systems. It is intended for use where robust, Rapid switching is required, offering environmental protection for installations exposed to dust and water ingress. The unit incorporates a rolling actuator mechanism to translate mechanical movement into a switching action suitable for control, safety interlock and monitoring functions.

Features and Benefits:

• Snap-action contacts deliver quick state changes for precise control
• 1NC and 1NO arrangement supports versatile circuit logic
• Rated for 240V AC and 250V DC to handle common supply types
• Operational temperature range from -40 to 85°C for harsh conditions
• Mechanical endurance of 10,000,000 cycles reduces replacement frequency
• IP66 enclosure with electrostatic epoxy-coated zinc resists ingress

Applications

• Suitable for conveyor end-of-travel detection in manufacturing lines
• Ideal for door or hatch position monitoring in plant equipment
• Used with actuated valves for position feedback in process systems
• Can be used for safety interlocks on packaging machinery
• Suitable for limit sensing on material handling gantries

What conduit provision exists for cable entry?

The device accepts a PG13.5 conduit entry to simplify secure wiring and gland fitting.

How is the actuator configured for different mounting needs?

The unit employs an adjustable roller lever actuator allowing alignment to the motion profile without altering the housing.

What type of switching behaviour should installers expect?

Contacts operate with a snap-action mechanism that ensures a Rapid transition between states to minimise arcing and contact wear.

What materials contribute to the enclosure’s durability?

The housing uses zinc with an electrostatic epoxy coating to provide corrosion resistance and a robust external finish.

Are there recognised approvals relevant to industrial deployment?

The product carries CCC, CE, CSA and UL approvals, indicating conformity with multiple regional standards.

Approvals

UL/ UL listed for Canada

Warning

GLC and GLD limit switches are not safety devices. They should be not used as emergency stop or safety devices. They must not be used in applications where personal injury could occur as a result of product failure.

Standards

IEC/EN 60947-5-1
While IEC/EN 609747-1 covers general rules relating to low voltage switchgear and controlgear, IEC/EN 60947-5-1 specifically relates to control circuit devices and switching elements. The standard monitors the characteristics of devices, the electrical and mechanical requirements and the functional requirements.

EN50047
GLC and GLD limit switches are constructed from housing that meets EN50047. EN50047 applies to position switches with an automatic return actuator. Models that meet EN50047 feature standardised characteristics and dimensions (30.5 x 31.1 x 68 mm).

IP 66
A rating of IP 66 ensures that the limit switch units are protected against dust and low-pressure jets of water.

Sealed to NEMA 1, 4, 12, 13
NEMA 1 states that enclosures can be used indoor and offers a degree of protection against contact with the equipment enclosed.
NEMA 4 states that enclosures can be used either indoor or outdoor and provide protection against windblown rain and dust, hose directed water and splashing water.
NEMA 12 states that enclosures are intended for use indoors and offer some protection from dust, dirt, falling dirt and dripping non-corrosive liquids.
NEMA 13 states that enclosures are used indoors and offer a level of protection from oil, non-corrosive coolants, spraying water and dust.