Telemecanique Sensors OsiSense XC Series Roller Lever Limit Switch, 1 CO, IP65, Metal Housing, 240V ac, 3A

N° de stock RS:: 199-282
Référence fabricant:: XC2JC10111
Fabricant:: Telemecanique Sensors

Telemecanique Sensors OsiSense XC Series Roller Lever Limit Switch, 1 CO, IP65, Metal Housing, 240V ac, 3A

Sous-total (1 unité)*

229,40 €

(TVA exclue)

277,57 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

Stocké-e par le fabricant

Prêt à être expédié à partir du 07 septembre 2026

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité
1 +	229,40 €

*Prix donné à titre indicatif

N° de stock RS:: 199-282
Référence fabricant:: XC2JC10111
Fabricant:: Telemecanique Sensors

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Telemecanique Sensors
	Product Type	Limit Switch
	Actuator Type	Roller Lever
	Contact Configuration	1 CO
	IP Rating	IP65
	Housing Material	Metal
	Contact Type	Snap Action
	Terminal Type	Screw Clamp
	Switching Current	3A
	Series	OsiSense XC
	Minimum Operating Temperature	-25°C
	Switching AC Voltage	240V ac
	Switching DC Voltage	250V dc
	Maximum Operating Temperature	70°C
	Width	40mm
	Length	183mm
	Standards/Approvals	CSA, RoHS, UL, VDE, IEC, REACH
	Depth	65mm
	Hazardous Area Certification	No
	Conduit Entry	1 Cable Gland
	Operating Force	0.3Nm
	Mechanical Life	30000000Operations

	Sélectionner tout
	Marque Telemecanique Sensors
	Product Type Limit Switch
	Actuator Type Roller Lever
	Contact Configuration 1 CO
	IP Rating IP65
	Housing Material Metal
	Contact Type Snap Action
	Terminal Type Screw Clamp
	Switching Current 3A
	Series OsiSense XC
	Minimum Operating Temperature -25°C
	Switching AC Voltage 240V ac
	Switching DC Voltage 250V dc
	Maximum Operating Temperature 70°C
	Width 40mm
	Length 183mm
	Standards/Approvals CSA, RoHS, UL, VDE, IEC, REACH
	Depth 65mm
	Hazardous Area Certification No
	Conduit Entry 1 Cable Gland
	Operating Force 0.3Nm
	Mechanical Life 30000000Operations

Se connecter pour voir les modèles CAO

Statut RoHS : Exempté

Pays d'origine :: FR

Telemecanique Sensors Osizense XC Series Limit Switch, IP65, 0.3Nm Operating Force - XC2JC10111

This limit switch is a roller‑lever actuator device designed for position sensing in industrial automation. It provides snap‑action switching for control circuits and is built to withstand typical plantroom environments while delivering repeatable contact operation for machinery and equipment monitoring.

Features and Benefits:

• Snap‑action contact ensures Rapid and reliable switching behaviour
• Metal enclosure provides robust protection against mechanical hazards
• IP65 ingress rating permits wash‑down and dusty environments
• 3 A switching capacity supports moderate control loads up to 250V DC
• 30 million operation mechanical life reduces maintenance frequency
• Operating range from -25 °C to 70 °C suits varied temperature conditions

Applications

• Suitable for conveyor end‑of‑travel detection in manufacturing lines
• Ideal for actuator position sensing in pneumatic systems
• Used for safety interlocks on access panels and guards
• Can be used for limit detection on packaging machinery

What type of contacts does it use and how do they behave?

It employs a single changeover contact with instantaneous snap‑action to provide clear state transitions for control logic.

How is wiring terminated for field installation?

Electrical connection is via screw‑clamp terminals and a single cable‑gland conduit entry for secure cable retention.

What actuator torque is required to operate the device?

The roller lever requires an operating torque of 0.3 N·m to initiate switching, allowing precise actuation from moving parts.

Which approval standards are applicable for deployment in industrial settings?

It meets multiple international standards and approvals including CSA, UL, VDE, IEC, RoHS and REACH.