Telemecanique Sensors XCMH Series Roller Plunger Limit Switch, 1 NO/1 NC, IP67, IP66, Plastic Housing, 240V ac, 0.75A
- N° de stock RS:
- 194-162
- Référence fabricant:
- XCMH21F2L1
- Fabricant:
- Telemecanique Sensors
Sous-total (1 unité)*
65,50 €
(TVA exclue)
79,26 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 51 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
- Plus 30 unité(s) expédiée(s) à partir du 25 septembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 65,50 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 194-162
- Référence fabricant:
- XCMH21F2L1
- Fabricant:
- Telemecanique Sensors
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Telemecanique Sensors | |
| Actuator Type | Roller Plunger | |
| Product Type | Limit Switch | |
| IP Rating | IP67, IP66 | |
| Contact Configuration | 1 NO/1 NC | |
| Housing Material | Plastic | |
| Contact Type | Snap Action | |
| Terminal Type | Cable | |
| Switching Current | 0.75A | |
| Series | XCMH | |
| Switching AC Voltage | 240V ac | |
| Switching DC Voltage | 250V dc | |
| Minimum Operating Temperature | -25°C | |
| Maximum Operating Temperature | 70°C | |
| Width | 30mm | |
| Standards/Approvals | IEC 60947-5-1, IEC 60204-1, CSA C22.2 No 14, UL 508 | |
| Length | 16mm | |
| Depth | 88mm | |
| Hazardous Area Certification | No | |
| Mechanical Life | 5000000Cycles | |
| Operating Force | 35N | |
| Sélectionner tout | ||
|---|---|---|
Marque Telemecanique Sensors | ||
Actuator Type Roller Plunger | ||
Product Type Limit Switch | ||
IP Rating IP67, IP66 | ||
Contact Configuration 1 NO/1 NC | ||
Housing Material Plastic | ||
Contact Type Snap Action | ||
Terminal Type Cable | ||
Switching Current 0.75A | ||
Series XCMH | ||
Switching AC Voltage 240V ac | ||
Switching DC Voltage 250V dc | ||
Minimum Operating Temperature -25°C | ||
Maximum Operating Temperature 70°C | ||
Width 30mm | ||
Standards/Approvals IEC 60947-5-1, IEC 60204-1, CSA C22.2 No 14, UL 508 | ||
Length 16mm | ||
Depth 88mm | ||
Hazardous Area Certification No | ||
Mechanical Life 5000000Cycles | ||
Operating Force 35N | ||
- Pays d'origine :
- ID
Telemecanique Sensors XCMH Series Limit Switch, IP67 Protection Rating, 5000000 Cycles Mechanical Life - XCMH21F2L1
This limit switch provides a mechanical means to detect position or travel in industrial equipment, using a roller plunger actuator and snap‑action contacts to deliver fast electrical switching. Designed for use in machinery control and safety interlocks, it offers a compact footprint and robust ingress protection for installation in industrial environments where reliable end‑of‑travel detection is required.
Features and Benefits:
• IP67 and IP66 rating keeps internal components dry during washdown
• Snap‑action contact offers rapid state change for precise signalling
• 1NO/1NC contact configuration enables flexible control circuit layouts
• 0.75A switching current supports low‑power DC and AC loads
• 35N operating force gives consistent actuation by mechanical interfaces
• 5,000,000‑cycle mechanical life reduces maintenance intervals
• Snap‑action contact offers rapid state change for precise signalling
• 1NO/1NC contact configuration enables flexible control circuit layouts
• 0.75A switching current supports low‑power DC and AC loads
• 35N operating force gives consistent actuation by mechanical interfaces
• 5,000,000‑cycle mechanical life reduces maintenance intervals
Applications
• Suitable for conveyor end‑of‑travel detection in production lines
• Ideal for door and gate position sensing on factory equipment
• Used with pneumatic actuators for sequence control feedback
• Can be used for safety interlocks on access panels and guards
• Used for position feedback on packaging machinery
• Ideal for door and gate position sensing on factory equipment
• Used with pneumatic actuators for sequence control feedback
• Can be used for safety interlocks on access panels and guards
• Used for position feedback on packaging machinery
What electrical voltages can it switch for control circuits?
It can switch up to 250V DC and up to 240V AC for compatible control and signalling circuits.
How is the unit connected into wiring harnesses?
The switch uses a cable‑style terminal for direct wiring to control panels or junction boxes.
What temperature range is acceptable for installation?
It operates reliably between -25°C and 70°C, suitable for most indoor and sheltered outdoor installations.
Which standards govern its electrical and safety characteristics?
It conforms to IEC 60947‑5‑1, IEC 60204‑1, CSA C22.2 No 14 and UL 508 for relevant switch performance and safety.
Liens connexes
- Telemecanique Sensors XCMH Series Roller Plunger Limit Switch IP67 Plastic Housing 0.75A
- Telemecanique Sensors XCMH Series Plunger Limit Switch IP67 Plastic Housing 0.75A
- Telemecanique Sensors XCMH Series Plunger Limit Switch IP66 Plastic Housing 0.75A
- Telemecanique Sensors XCMH Series Roller Plunger Limit Switch IP66 Plastic Housing 0.75A
- Telemecanique Sensors XCMH Series Roller Plunger Limit Switch IP66 Plastic Housing 0.75A
- Telemecanique Sensors XCMH Series Roller Plunger Limit Switch IP67 Plastic Housing 0.75A
- Telemecanique Sensors XCMH Series Plunger Limit Switch IP67 Plastic Housing 0.75A
- Telemecanique Sensors XCMH Series Roller Plunger Limit Switch IP67 Plastic Housing 0.75A