Telemecanique Sensors XCMH Series Plunger Limit Switch, 2 NC, IP67, IP66, Plastic Housing, 240V, 0.75A
- N° de stock RS:
- 194-112
- Référence fabricant:
- XCMH2910L3
- Fabricant:
- Telemecanique Sensors
Sous-total (1 unité)*
51,90 €
(TVA exclue)
62,80 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Stocké-e par le fabricant
- Prêt à être expédié à partir du 05 janvier 2027
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 51,90 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 194-112
- Référence fabricant:
- XCMH2910L3
- Fabricant:
- Telemecanique Sensors
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Telemecanique Sensors | |
| Product Type | Limit Switch | |
| Actuator Type | Plunger | |
| IP Rating | IP67, IP66 | |
| Contact Configuration | 2 NC | |
| Housing Material | Plastic | |
| Contact Type | Snap Action | |
| Switching Current | 0.75A | |
| Series | XCMH | |
| Minimum Operating Temperature | -25°C | |
| Switching AC Voltage | 240V | |
| Switching DC Voltage | 300V dc | |
| Maximum Operating Temperature | 70°C | |
| Length | 16mm | |
| Depth | 60mm | |
| Width | 30mm | |
| Standards/Approvals | UL 508 IEC 60947-5-1 CSA C22.2 No 14 IEC 60204-1 | |
| Hazardous Area Certification | No | |
| Conduit Entry | M20 | |
| Mechanical Life | 5000000Cycles | |
| Mounting Orientation | Vertical | |
| Operating Force | 42.5N | |
| Sélectionner tout | ||
|---|---|---|
Marque Telemecanique Sensors | ||
Product Type Limit Switch | ||
Actuator Type Plunger | ||
IP Rating IP67, IP66 | ||
Contact Configuration 2 NC | ||
Housing Material Plastic | ||
Contact Type Snap Action | ||
Switching Current 0.75A | ||
Series XCMH | ||
Minimum Operating Temperature -25°C | ||
Switching AC Voltage 240V | ||
Switching DC Voltage 300V dc | ||
Maximum Operating Temperature 70°C | ||
Length 16mm | ||
Depth 60mm | ||
Width 30mm | ||
Standards/Approvals UL 508 IEC 60947-5-1 CSA C22.2 No 14 IEC 60204-1 | ||
Hazardous Area Certification No | ||
Conduit Entry M20 | ||
Mechanical Life 5000000Cycles | ||
Mounting Orientation Vertical | ||
Operating Force 42.5N | ||
- Pays d'origine :
- ID
Telemecanique Sensors XCMH Series Limit Switch, IP67 Ingress Protection, 5000000 Cycles Mechanical Life - XCMH2910L3
This limit switch is a plunger-actuated device designed for control and safety sensing in industrial systems. It offers snap-action contacts housed in a plastic enclosure with ingress protection suitable for challenging environments. The unit supports both AC and DC switching and is intended for vertical mounting where precise mechanical operation and long service life are required.
Features and Benefits:
• Snap-action dual NC contacts deliver fast, positive switching response
• Rated switching at 300V DC and 240V AC for versatile load handling
• Operating current 0.75A enables low-power control circuit compatibility
• Mechanical endurance of 5,000,000 cycles reduces maintenance frequency
• Plunger actuator requires 42.5N operating force for consistent actuation
• M20 conduit entry simplifies cable gland installation and sealing
• Rated switching at 300V DC and 240V AC for versatile load handling
• Operating current 0.75A enables low-power control circuit compatibility
• Mechanical endurance of 5,000,000 cycles reduces maintenance frequency
• Plunger actuator requires 42.5N operating force for consistent actuation
• M20 conduit entry simplifies cable gland installation and sealing
Applications
• Suitable for conveyor end-of-travel position sensing
• Ideal for safety interlock detection on access panels
• Used with automated presses for stroke-limit feedback
• Can be used for level detection on material feeders
• Suitable for assembly-line position confirmation switches
• Ideal for safety interlock detection on access panels
• Used with automated presses for stroke-limit feedback
• Can be used for level detection on material feeders
• Suitable for assembly-line position confirmation switches
What temperature range can the device reliably operate within?
It functions across ambient temperatures from -25°C up to 70°C for typical industrial environments.
How is the unit mounted and oriented during installation?
It is designed for vertical installation to ensure correct actuator alignment and repeatable switching.
What materials and protection support placement in washdown or dusty zones?
The enclosure is formed from plastic and carries ingress protection ratings suitable for exposure to dust and water spray.
Which standards cover its electrical and safety characteristics?
Compliance includes UL508, IEC 60947-5-1, CSA C22.2 No 14 and IEC 60204-1 for industrial switchgear applications.
Liens connexes
- Telemecanique Sensors XCMH Series Plunger Limit Switch IP66 Plastic Housing, 240V
- Telemecanique Sensors XCMH Series Roller Plunger Limit Switch IP67 Plastic Housing, 240V
- Telemecanique Sensors XCMH Series Roller Plunger Limit Switch IP66 Plastic Housing 0.75A
- Telemecanique Sensors XCMH Series Roller Plunger Limit Switch IP67 Plastic Housing, 240V
- Telemecanique Sensors XCMH Series Plunger Limit Switch IP67 Plastic Housing 0.75A
- Telemecanique Sensors XCMH Series Roller Plunger Limit Switch IP66 Plastic Housing 0.75A
- Telemecanique Sensors XCMH Series Plunger Limit Switch IP66 Plastic Housing 0.75A
- Telemecanique Sensors XCMH Series Plunger Limit Switch IP67 Plastic Housing 0.75A