Telemecanique Sensors XCMH Series Plunger Limit Switch, 1 NO/1 NC, IP66, IP67, Plastic Housing, 240V ac, 750mA

N° de stock RS:: 194-148
Référence fabricant:: XCMH2110L1
Fabricant:: Telemecanique Sensors

Telemecanique Sensors XCMH Series Plunger Limit Switch, 1 NO/1 NC, IP66, IP67, Plastic Housing, 240V ac, 750mA

Sous-total (1 unité)*

39,90 €

(TVA exclue)

48,28 €

(TVA incluse)

Informations sur le stock actuellement non accessibles - Veuillez vérifier plus tard

Unité	Prix par unité
1 +	39,90 €

*Prix donné à titre indicatif

N° de stock RS:: 194-148
Référence fabricant:: XCMH2110L1
Fabricant:: Telemecanique Sensors

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Telemecanique Sensors
	Product Type	Limit Switch
	Actuator Type	Plunger
	Contact Configuration	1 NO/1 NC
	IP Rating	IP66, IP67
	Housing Material	Plastic
	Contact Type	Snap Action
	Switching Current	750mA
	Terminal Type	Cable
	Series	XCMH
	Switching DC Voltage	250V dc
	Minimum Operating Temperature	-25°C
	Switching AC Voltage	240V ac
	Maximum Operating Temperature	70°C
	Width	30mm
	Depth	60mm
	Length	16mm
	Standards/Approvals	CSA C22.2 No 14, IEC 60204-1, IEC 60947-5-1, UL 508
	Hazardous Area Certification	No
	Operating Force	42.5N
	Mechanical Life	5000000Cycles

	Sélectionner tout
	Marque Telemecanique Sensors
	Product Type Limit Switch
	Actuator Type Plunger
	Contact Configuration 1 NO/1 NC
	IP Rating IP66, IP67
	Housing Material Plastic
	Contact Type Snap Action
	Switching Current 750mA
	Terminal Type Cable
	Series XCMH
	Switching DC Voltage 250V dc
	Minimum Operating Temperature -25°C
	Switching AC Voltage 240V ac
	Maximum Operating Temperature 70°C
	Width 30mm
	Depth 60mm
	Length 16mm
	Standards/Approvals CSA C22.2 No 14, IEC 60204-1, IEC 60947-5-1, UL 508
	Hazardous Area Certification No
	Operating Force 42.5N
	Mechanical Life 5000000Cycles

Pays d'origine :: ID

Telemecanique Sensors XCMH Series Limit Switch, IP66/IP67 Ingress Protection, 0.75A Switching Current - XCMH2110L1

This limit switch provides electro-mechanical position sensing for industrial machinery where a compact, robust actuation device is required. Fitted with a plunger actuator and designed for use outside hazardous zones, it offers a straightforward means to detect and break or make circuits in control systems. The unit connects via a fixed cable and complies with recognised electrical machinery safety standards.

Features and Benefits:

• 1 NO/1 NC snap-action contact for precise state change
• 42.5N operating force enabling consistent actuation response
• 0.75A switching current suitable for control signal circuits
• Rated for 250V DC and 240V AC accommodating varied supplies
• Mechanical endurance of 5,000,000 cycles reducing maintenance intervals
• IP66, IP67 waterproof plastic housing for washdown and dust protection

Applications

• Suitable for end-of-travel detection on conveyor stops
• Ideal for position sensing on packaging machinery
• Used with light-duty motor starters and control relays
• Can be used for gate and access interlocks in factories
• Suitable for repeated cycling in assembly lines

What terminals are provided for electrical connection?

A permanently attached cable serves as the terminal method, eliminating screw terminals and simplifying installation where cable routing is required.

What climatic range can it operate within?

It functions across an ambient span from -25°C to 70°C, allowing use in cold storage peripheral equipment and warm plant areas.

Which compliance standards govern its electrical and mechanical safety?

It meets CSA C22.2 No. 14, IEC 60204-1, IEC 60947-5-1 and UL 508 requirements for industrial switchgear applications.

What housing material and protection level suit harsh environments?

The enclosure is moulded plastic and carries ingress protection to IP66 and IP67, permitting temporary immersion and high-pressure washdown conditions.