Références fabricant

Endress+Hauser FTL31 Series Vibration Level Switch Level Switch, Threaded Mount, Housing Polybutylene Terephthalate

N° de stock RS:: 256-6172
Numéro d'article Distrelec:: 303-51-208
Référence fabricant:: FTL31-AA4U3BAWSJ
Fabricant:: Endress+Hauser

Endress+Hauser FTL31 Series Vibration Level Switch Level Switch, Threaded Mount, Housing Polybutylene Terephthalate

Sous-total (1 unité)*

236,34 €

(TVA exclue)

285,97 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

En stock

59 unité(s) prête(s) à être expédiée(s)
Plus 11 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Plus 13 unité(s) expédiée(s) à partir du 10 septembre 2026

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité
1 +	236,34 €

*Prix donné à titre indicatif

N° de stock RS:: 256-6172
Numéro d'article Distrelec:: 303-51-208
Référence fabricant:: FTL31-AA4U3BAWSJ
Fabricant:: Endress+Hauser

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Endress+Hauser
	Device Type	Vibration Level Switch
	Product Type	Level Switch
	Mount Type	Threaded Mount
	Housing Material	Polybutylene Terephthalate
	Minimum Operating Temperature	-40°C
	Maximum Operating Temperature	70°C
	Maximum Pressure	25bar
	Standards/Approvals	CE mark
	Series	FTL31
	Hazardous Area Certification	No

	Sélectionner tout
	Marque Endress+Hauser
	Device Type Vibration Level Switch
	Product Type Level Switch
	Mount Type Threaded Mount
	Housing Material Polybutylene Terephthalate
	Minimum Operating Temperature -40°C
	Maximum Operating Temperature 70°C
	Maximum Pressure 25bar
	Standards/Approvals CE mark
	Series FTL31
	Hazardous Area Certification No

Pays d'origine :: DE

Endress+Hauser FTL31 Series Level Switch, 70°C Maximum Operating Temperature, 25 Bar Maximum Pressure - FTL31-AA4U3BAWSJ

This level switch is a vibration-based sensor designed to detect material levels in industrial process systems. It operates across a wide ambient temperature range and connects to remote monitoring via an extended cable, making it suitable for installations where continuous mechanical contact is undesirable. The device is intended for non-hazardous zones and incorporates a polymer housing for chemical compatibility.

Features and Benefits:

• Operates reliably from -40°C to 70°C to cover extreme conditions
• Withstands process pressures up to 10 bar to 25 bar for diverse systems
• Uses just 15 mA current consumption to reduce power draw on loops
• Supplied with 1000m cable to enable distant mounting and control-room runs
• Threaded mount design for straightforward installation into standard ports
• Polymer housing material resists corrosion and simplifies maintenance

Applications

• Suitable for monitoring bulk solids in silos and hoppers
• Ideal for liquid level detection in tanks with moderate pressure
• Used with remote control rooms where long cable runs are required
• Can be used for point-level switching in pump protection schemes
• Suitable for non-explosive industrial process vessels

What type of enclosure does it have for corrosive environments?

The unit is enclosed in a polybutylene terephthalate casing that provides chemical resistance and reduces the need for metallic corrosion protection.

How is the sensor mounted into process equipment?

It uses a threaded mounting interface allowing direct insertion into standard tapped ports for secure mechanical attachment.

Is the device suitable for classified hazardous areas?

No, it is not certificated for hazardous-area use and should only be installed in non-hazardous locations.

What electrical loading should be planned for in system design?

The sensor draws a low operating current of 15 mA, which should be accounted for in loop power budgets and input circuits.

Does the product meet any conformity marking for European markets?

It carries a CE marking indicating conformity with relevant UK and European directives for marketed electrical apparatus.

Liens connexes

Soyez le/la premier·ère à être informé de nos nouveautés produits et de nos offres spéciales.

adresse e-mail

Les données personnelles que vous nous fournissez en vous inscrivant à cette liste de diffusion seront traitées conformément à notre politique de confidentialité.