MEAN WELL LED Driver, 29.7/54 V Output, 25.38 W Output, 470 mA 1 to 10 V PWM Resistance

Visuel non contractuel

Offre groupée disponible

Sous-total (1 unité)*

22,28 €

(TVA exclue)

26,96 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
En stock
  • 12 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité
Prix par unité
1 - 422,28 €
5 - 921,17 €
10 - 2420,41 €
25 - 4919,84 €
50 +18,83 €

*Prix donné à titre indicatif

N° de stock RS:
764-7299
Numéro d'article Distrelec:
301-34-918
Référence fabricant:
LPF-25D-54
Fabricant:
MEAN WELL
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

MEAN WELL

Product Type

LED Driver

Output Voltage

29.7/54 V

Maximum Output Power

25.38W

Input Voltage

127 → 431 V dc, 90 → 305 V ac

Mount Type

Screw

Sub Type

LED Driver

Dimming Operation

1 to 10 V PWM Resistance

Terminal Type

Wire

Input Voltage Type

AC/DC

IP Rating

IP67

Operating Modes

Constant Voltage

Driver Current

470 mA

Number of Outputs

5

Series

LPF-25D

Standards/Approvals

UL, SELV, ENEC, EAC, CSA, CE, CB

Configuration

Enclosed

Primary Type

AC-DC

Power Dissipation

25.38W

Mean Well LPF-25D Series 25W Dimmable IP67 Rated LED Driver Power Supply


LPF-25D series 25W dimmable LED driver power supply with a wide range universal AC input range of 90 to 305Vac, a built-in active PFC function and a "three-in-one" dimming function using a 1 to 10 Vdc or PWM signal or resistance. These LPF-16D series 16W dimmable LED driver power supplies have a class II AC input design (two wires without FG) and are fully potted by heat-conducted glue which provides an IP67 protection rating and an internal shock absorption to withstand 5G vibration. A high efficiency of up to 85% is also offered by these 25W dimmable LED driver power supplies and an ability to operate under a wide temperature range of -40 to +70° using free air convection. Typical applications for these 25W dimmable LED driver power supplies include LED lighting and moving sign applications in dry, damp or wet locations.

Universal AC input range of 90 to 305 Vac

94V-0 rated fully isolated plastic case

Built-in active PFC function

Built-in 3 in 1 dimming function (1 - 10 Vdc or PWM signal or resistance)

Fully encapsulated with glue potting to IP67

High effciency of up to 85%

Class II AC input design (no FG)

Class 2 power unit

Free air convection cooling

Short circuit, over current, over voltage and over temperature protection

EMC compliance to EN55015

Harmonic current compliance to EN61000-3-2 Class C (≥50% load)

Mean Well LED Drivers / Power Supplies


Note

MTBF to MIL-HDBK-217F (25°C)
Derate power above 50°C

Approvals

cULus, UL, CB

Standards

UL8750, CSA C22.2 No. 250.0-08 (except for 48V, 54V), EN61347-1, EN61347-2-13 independent approved, IP67(optional); Design refer to UL60950-1, TUV EN60950-1

Liens connexes

Recently viewed